97 (or even 94) dB sensitivity is VERY efficient. Compared to a typical 89dB speaker that means you need something like 1/4 to 1/8 the power for the same volume.
An "8 ohm" amp is simply the load it is rated into. Ohms are a measure of resistance. The higher the easier to drive. The lower the harder. Zero ohms is a short circuit. In practice nearly every amp (except tube amps) is designed for a s low an output impedance as possible -- on the order of 1/4 ohm (0.25 and below). Its the other way around that's a problem - a high impedance output tube amp cannot deliver high current. A 4 ohm or (yikes) 2 ohm speaker demands lots of current. No go, like an under powered motor.
The good news is that at 97 dB it wont need much current anyway!(for the record current = voltage / load in ohms).
Bottom line a really good solid state amp ought to dive anything. Within reason mine will.
An "8 ohm" amp is simply the load it is rated into. Ohms are a measure of resistance. The higher the easier to drive. The lower the harder. Zero ohms is a short circuit. In practice nearly every amp (except tube amps) is designed for a s low an output impedance as possible -- on the order of 1/4 ohm (0.25 and below). Its the other way around that's a problem - a high impedance output tube amp cannot deliver high current. A 4 ohm or (yikes) 2 ohm speaker demands lots of current. No go, like an under powered motor.
The good news is that at 97 dB it wont need much current anyway!(for the record current = voltage / load in ohms).
Bottom line a really good solid state amp ought to dive anything. Within reason mine will.