2. tech-talk
  3. 1336225607

Connect eq to amp

I guess this question have been asked many times before but I hope to get an answer on this specific question I have. If I have an integrated amplifier or a pre amp with Tape In and Tape Out connections on the back, with a switch on the front, Tape/Source, can I use an external EQ for every standard line input (cd, dvd etc)?
egoben
kr4's avatar
kr4
3,686 posts
 
Hard to be certain as there are, often, surprising variabilities among different equipment but, in general, yes.

Kal
egoben OP
56 posts
 
OK, that's good to know, thank you!
dhl93449
455 posts
 
Only if the line preamp has a true Tape monitor function. That is, when a source is selected and sent to the tape record out, selecting tape monitor substitutes the Tape In for the selected source without disconnecting the source from Tape Rec Out.

In the 80's, this was common to every pre-amp, integrated amp. Today, it is rare.

My Halo P3, for example, has Tape Rec Out/Tape Play In, but if you select "Tape" you can only get an input from the tape Play In and the record source is disconnected.

However, the P3 gets around this by having an "External Processor" loop, which is effectively a place to splice in an external device between the source and the volume gain control sections of the pre-amp.

The obvious alternative is to put your EQ between your Line amp outs and your Power amp inputs. If it's got a gain of 1, should be no issue.
egoben OP
56 posts
 
Thanks!

I might get me an integrated tube amp without tone controllers, which my current have, and sometimes I really need those. I might get a Jadis DA 60. Here are some pics of a similar one. http://www.ls3-5a-forum.com/phpBB3/viewtopic.php?t=2662

I still don't know for sure if it would work with an eq connected to an amplifier like this, but I think so.
More to discover