You might begin by swapping the Schroeder for the SME on your Cosmos. Does that improve the SQ derived from the Cosmos? That’s a clue to your puzzle, but different cartridges sound different with different tonearms. So if you swap arms, audition several different cartridges in the Schroeder/Cosmos before coming to any definitive conclusion. At this level, it’s up to you to do the work needed to arrive at a decision that works best.
Considering Revising My Tonearms. Input On This Option Considered
A couple of days ago I let my recently acquired Triplanar VII U2 go. I have been thinking about my current collection of analog bits and pieces and have been trying to decide on how I want to move forward. First table is a SOTA Cosmos Eclipse with a SME V of unknown age on it. The second table is a Scheu Audio Das Laufwerk No2 on it with a Schroder CB-1L arm. There is a provision for a second arm and I do have a Dynavector DV505 I will put back in place. The removable headshell lets me play with cartridges a bit, and I find that a desirable option.
I would tend to think the SOTA is the superior table, but so far the differences between it and the Scheu are minimal. The question I have been considering "Is this related to the SME V?" What will it take to improve upon it, and are the differences significant?
I guess the final question is does it make sense to liquidate most items and pare this down to one turntable? At what level is there meaningful improvements over the SOTA? If so, is the Schroder competent enough to be carried over.
If I did replace the SME V on the SOTA, I do have a line on a Graham Phantom II that is an option. The layout of the SOTA armboard limits things to a 10 inch arm or shorter, and weighing less than 2.2 pounds.
Cartridges I have available are an Ortofon Verismo, Transfiguration Audio Proteus, Ortofon MC2000, Kiseki Blackheart (1st generation), and Audio Tekne MC-6310. If I pared things down to one table it might limit me on what cartridges can be used.
Thoughts and considerations are welcome. Right now the thought is do I obtain the Graham and put it on the SOTA or do I revamp the whole set up?
- ...
- 12 posts total
A many dimensional puzzle… teasing out the impact of changes when you can’t do a single variable test. The SOTA is a formidable table but the noted arm well certainly limits things…. Im inclined to agree w Lew. Very curious about culling the Triplaner…. i have that arm ( on a Bardo )… so i am ( of course ) biased…. i also have a 505… interesting sonic differences… |
I had the same thought as lewm, put the Schroeder on the other TT just to learn something. Of course, you can put both on the other to learn more, if not too troublesome ... I would keep or replace the TT with 2 arm capability, and one arm would have a removable headshell as you mentioned. some tonearms have interchangeable arm wands, one can be straight/fixed; other S arm with removable headshell VPI unipivot allows changing armwands easy, Steve at VAS has a big VPI and several armwands with pre-mounted cartridges ready to go. Buy a cartridge from him, if close enough, he demo’s it on his VPI. I installed this wonderful Technics EPA-500 base for a friend, several easily changed arm wands, very easy arm height lever.
straight fixed shown, S, removable headshell an optional arm wand. |
@lewm Unfortunately the Schroder is an 11 inch arm and the SOTA can only accept 9 to 10 inch arms. |
- 12 posts total