Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions


I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
Mogami 2477 Blue Neglex OFC 12 guage coaxial cable. I had two 20ft pieces in use with my KLH Nines for 23 years! Lost it when I moved to Florida.
@charles1dad So I've been auditioning the Benchmark AHB2 amplifier, as well as their new HPA4 Preamp, and I've even been trying a Dangerous Convert 2 PRO Audio DAC just for comparison to Benchnark DAC2 HGC on the Encores.

The AHB2 is actually very smooth, dead quiet, detailed, transparent and dynamic to listen to, especially at lower to medium volume levels, but unfortunately at higher levels the 200w/4ohm power limitation of the amp becomes its achilles heel. I wouldn't suggest that the amp is cool or clinical, but maybe a slight tad less emotionally involving nonetheless. The Nords are better in this respect at 700wpc into 4ohms with a very similar sound quality thats slightly more involving and even at higher volume levels. Ultimately, I'm sending the AHB2 back because I do not feel spending $6k on a pair of them so I can run them in bridge mode is warranted when I love the Nord monoblocks a bit more and which only cost me half the money and deliver very good sound quality and plenty of power.

The new Benchmark HPA4 Preamp is a real keeper. It's very transparent, detailed, has great dynamics at lower volume levels and improved on the sound of the Benchmark DAC2 HGC being used as a stand alone dac/preamp. It's 64x relayed volume control is a joy to use and it does seem to take my system up a notch dynamically when driving the nords or my Diavolo SET.

The Dangerous Convert 2 Pro Dac sounds were very close to the Benchmark once the levels were adjusted in the HPA4 preamp. Using Roon I could play music simultaneously to both dacs via USB as a grouped zone and go back and forth. I may keep the piece just because I think its a really nice DAC with maybe a touch more naturalness and not at all analytical. A very involving sounding piece and I totally dig the level meters on it. I know thats a bit silly 😋

I've got a Crane Solaris DAC coming to compare to the Dangerous convert 2 and the benchmark dac2 hgc next week.


@jcarcopo,  I owned the AHB2 for a while and it is everything you said, clean, dead quiet and transparent. Then one day a friend brought over his 30 year old Mirror Image Audio amp. A 200 watt amp with the first 30 in class A. This old amp made the AHB2 sound thin and lacking in bass. I sold the AHB2 and eventually found an old MI amp used. This old amp is very impressive for when I’m not in the mood for tubes.
@lancelock Thanks for the comment. I think Benchmark should consider that since they are going after the audiophile market that maybe they might consider releasing an alternative version of an amp that’s less about specs and slightly more emotionally involving. I know this goes against their ethos of impeccable specs, but they would likley sell to a broader base if they offered something a tad more emotional sounding and not just simply measuring exceedingly well. It would be hard for me to feel compelled to buy the AHB2 based on specs alone. I will repeat their new preamp is exactly what I want from a preamp. Nearly no alteration or editorialization of the preceding source signal is what I’ve always wanted in a preamp.
Well, after an all day affair of putting the HPA4 in and running source direct repeatedly. The HPA4 is going back to Benchmark.

I'm very sad to say the HPA4 Preamp does rob me of some upper frequency sparkle and transient response. I've run through putting the hpa4 in and taking it out several times and running each DAC direct to either my Nord Monoblocks or my Art Audio Diavolo SET Tube 300b Amplifier to my Tekton Design Encores speakers and regardless of the DAC or amps I'm using I can hear clearly a noticeable drop in resolution, upper midrange clarity, and transient response. Plucks of guitars seem a little lifeless now. The overall sound is more homogeneous sounding and more 2 dimensional sounding. It's a warmer less neutral sound, but almost like a film coating painted on everything I hear. This is really disappointing because this preamp was supposed to take my system to the next level, but unfortunately it's a step backwards for me. I'm returning it to Benchmark, but I really feel bad about it all the same.