Digitizing LPs: General advice wanted

Your computer OS will automatically handle the accessing of multiple hard drives. All the user has to do is specify, via software, where the music files are to be stored.

Onhwy61:

Thanks. You response is obvious. I will just have to make sure that option with my recording software. I am cautious because a "computer expert" installed the second drive and some software that was supppose to allow "dual boot up option"- XP or 98- by pressing one key at start-up. It has never worked but I did get a big bill. So, whenever I read about a procedure that I have never done, I ask for clarification.

Of course the simple thing to do is put your LPs onto tape cassettes, using a really good recorder.

The only real advantage of digital recording is that you can have a lot of fun on your computer, fixing pops, scratches and other LP woes. If you are not interested in becoming a computer geek, don't bother with digital.

Eldatford:
I agree that copying to cassettes is simple and easier. In the 60's and 70's I made dozens of cassettes from LP's and "all music" FM stations. Those cassettes have long since died.

My LP's are 20-40 years old. Most have not been re-issued on CD. So, to preserve the music of my younger days, making CD's seem to be the best option at this time.

I didn't read all of the comments but you can burn to 24/96, however the cost involved may be more than your willing to pay. Here is a good starting point. You would need a computer in order to burn the signal to it's hard drive. You would need an A/D that will convert to that signal. I would suggest Grace designs Lunatec V3 or Appogee's Minime (which) has a USB port. You need a sound card that will allow you to store the data on your computer. M audio make an outboard type, I think it is called the F410. You need a DVD R burner for your computer and then you would need to send a dummy video image to the DVD for the video section of the disc while you are burning to the audio tracks. Many people use a jpeg image.

If this sounds like a pain it is but it will work and you will be able to play back your dicks on DVD R machines. Cost would be around $2000, as long as you have the computer power already available.

Or you could buy Alesis Masterlink and burn 24/96 to their propritary machine. Meaning you will always need their machine to playback. However, you can buy them at around $900.

For more info visit www.Oade.com Taper section and ask questions there.