Dodd preamp vs. McCormack RLD-1 preamp

The gain switch would be a fantastic feature to add to the Dodd. I can run passive with no gain issues, it would very nice to have 0, +6db, +16db (or someting like that) toggle switch, but alas. I do agree that it would be a pretty important feature for use with different front ends and/or amps. I asked Gary if I could reduce the gain, giving me more play with the volume control, but it does not appear it can be done - unless I misunderstood him.

I would like to thank Spencer (sbank) for recommending I try the Dodd; I'm glad I did.

I would like to thank Mrj for all the info on the Dodd and how it helped me buy and try it out in my Audio Note system. It smokes the AN M3.

I read in the sixmoons review, "The preamp is remote controlled and offers 2 outputs for biamping or adding a subwoofer, as well as having a passive pass-thru that operates with the unit in the off position. " Does that mean it can be used as a passive pre? If so, how do you do that?

They're referring to the Home Theater pass-thru.

One of the reasons that swayed me against the Dodd was the high gain. However that was when I had an extremely high gain solid state amp in my system. With that amp most preamps, with the exception of a passive, gave me little wiggle room on the volume control, nine or ten o'clock was normal listening volume. I'm curious now as to how it may sound with my tube monoblocks.

Pubul57 - it may be possible to strap resistors across the outputs to lower the gain (Vishay's or Audio Note Tantalums could be a nice touch). It's a typical tweak and better than using external attenuators like Rothwell. Another solution is to integrate the resistors in your cable. I think Luminous Audio, IIRC, actually sells cables with resistors that will lower the gain by 10 - 14 db.