Does the Meridian 508.24 invert absolute phase?

I received a response from David Hall of Meridian Audio.
Dave.Hall@meridian.co.uk
The phase switch only changes the phase of the CD player. It does not affect the whole system. Therefore, this is the same as the Rotel I mentioned.
I am not Silly after all.

This makes sense. Preamps like Conrad Johnson and Blue Circle are out of phase and require you to reverse the speaker wires. Their literature states that they would have to add another gain stage to those preamps to make them phase correct. They don't because it would only degrade the sound. If all they had to do was reverse the wires going to the analog pre-outputs they would; but it evidently is not the same thing.

This is a Cool Hand Luke moment. Mshan, if you have a meridian cdp and want to know the answer to your question, call meridian tech support in Atlanta, at 404-344-7111. They will tell you what I said above. I have a 508, and I know what it does.

Why would someone who does not know the answer to the question and does not own the subject component waste everyone's time? A real testimonial for the value of this website, huh?

Then please educate me and explain why companies make gear out of phase and then tell us in the manual we have to fix the problem by moving the speaker wires? I'd would really like to know. Are all those audio engineers so stupid that they can't just reverse the wires inside the unit if the solution is that simple?

This still might be what that Meridian switch does, which is consistant with the Rotel phase switch which to repeat that owners manual again; changed the absolute phase of the recording by 180 degrees, but does not change the phase of the speakers. Why would the Meridiam be different, if this is a feature to add to a CD player that Rotel probably copied? I did own the Rotel BTW.

So we have two different people at Meridian giving different answers. One at the manufacturer in the UK, the other at the US Sales office. So the guy in the UK is automatically wrong based on what?

I really don't care which answer is right, I only care that we have a right answer. I just know that phase and polarity is a very misunderstood subject and is not just one thing.

Paulwp, Do you actually limit your comments on Audiogon to gear that you own? Currious?

The meridian cdp offers the user the opportunity to reverse phase if the user wants to do that, in case he thinks a cd is out of phase. Some preamp manufacturers, e.g., CJ and AI, make preamps without the extra gain stage required to bring them into phase, and so tell the user they need to reverse their speaker cables. It isn't to make work for their customers. The purpose is to leave out the extra gain stage.

Such is not the idea with the meridian cdp, but the effect is the same if that's what the user wants to do. You simply had a failure to communicate. The guy in the UK may have thoughr you were asking if the meridian remote function operated on an entire meridian system instead of just the cdp.

I wouldnt answer a question of fact if I didnt know the answer.

Who knows Paulwp ? I actually gave the Meridian guy in the UK a free choice of "A" (effects only the CD player Digital code only) or "B" (reverses speaker phase), so I hoped there would not be any confusion. He picked "A". You would think working in the UK where they design and make the stuff he would know ?? Oh well !! I did not lead him into one answer.

No matter what that Meridian switch does or does not do, the basic concept of what we are discussing does not seem possible to me.

We have an audio system that has two completely closed hard-wired electrical paths; one carries positive electrical current, the other one carries negative current.

We are being told to believe that music encoded as 1's and 0's on a piece of computer media (the CD) can cause the positive electical current to change into negative electric current (and negative into positive) causing your speaker to physically go in (have suction), instead of go out (pressure). If this were a vinyl LP recorded out-of-phase, then a piece of plastic with rough grooves on it can cause positive electric current in a hard-wired system to change to negative current (and negative to positive).

Since we have already established that audio gear would need to have another actual electrical circuit (gain stage in your example) to invert the phase; then when we insert a out-of-phase recording into a CD player (or LP on the turntable); our audio system must be physically growing another circuit or gain stage (which would of course instantly disappear when presented with music recorded in phase). There is no other physical way for the actual electrical current to change polarity.

I've seen this watching Star Trek on TV. They put what looks like a computer disc in a slot, and matter instantly forms into their lunch out of thin air.

Now Rotel stated in their owners manual that their phase switch only inverts (corrects) the digital code in the DAC chip, and has no effect on the actual electrical phase of the system. Now this sounds logical to me.

So the Meridian switch may actually add (or remove) a stage (phase variance) to the path to invert the polarity of the electric, which is fine. But the CD cannot (I assume). The Meridian then plays an out-of-phase recording, out-of-phase. Then two wrongs make a right?

I have a client who is a digital design engineer for a company that makes Pro-Audio equipment. Next time I talk to him, I will ask about phase variances in the digital bitstream and see what he says.