No problem. If your amp only has a two prong male connection, then it will be double-insulated and will not use the chassis as the common ground; it's been designed that way, so probably best not to start trying to earth it yourself.
Effect of two power prongs, not three
Almost every power cord I have seen has a three prong IEC female connector socket ("C13"). My amp (Myryad) has only a two prong male IEC ("C18"). Wikipedia states that the C18 does not have a third pin for earthing and also states that a "C18 inlet will accept a C13 line socket . . . .� Any problem with buying a standard cord with a C13 socket? Any problem with lack of a ground?
- ...
- 3 posts total
Yes, there is no problem electrically. But I'm not sure that a replacement cord with a 3-prong female socket will mechanically mate with your amplifier. The statement about a C18 inlet accepting a C13 line socket I believe refers to the fact that a 3-prong wall outlet will accept a 2-prong plug. Regards, -- Al |
A follow-up to my previous post. I took a look at what was probably the same Wikipedia writeup that you referred to. If your amp inlet looks like this, then you should be ok: http://en.wikipedia.org/wiki/Image:Socket_IEC320_Kaltger%C3%A4teeinbaustecker_DIN_VDE_0625_Teil_1_Normblatt_C18.jpg My concern had been that there would not be sufficient clearance around the inlet to insert the part of the cord socket that has the third pin. Regards, -- Al |
- 3 posts total