Estate sale Fuselier speakers for $370 but I know nothing about them.

John Fuselier was an outstanding speaker designer and his speakers sounded wonderful. I had a pair of 3.3's which I loved, used them for over fifteen years before moving on. Time aligned and I believed he used a series crossover, they sounded great and gave me many years of listening pleasure.

The two speakers on the ends where the grill cloth extends down almost to the bottom and the top plate is inset within the grill cloth look exactly like my 3.3's. There were a couple of incarnations of the 3 series so they could be a 3.0 or a 3.3 and possibly a model after that (I believe he produced a 3.8 but my recollection is that they used a different cabinet). At any rate, if they are a 3.0 or 3.3 then definitely worth considering at that price. I'm not familiar with the two speakers in the middle where the grill cloth stops further up.

One thing to consider though is that these were made in the early to mid eighties and as such are close to forty years old, therefore the condition of the drivers may be suspect as with any older speaker. If you could possibly arrange for an audition to assure that they are functioning properly that would be ideal. 

weebeesdad, unfortunately there is no way to test them. They do look to be in spectacular condition, but that's not to say whether they have been used to death or not. 

For an hypothetical, let's just say the driver is shot.  Where does that leave me? Again, I'm very new at this but I assume the craftsmanship of the enclosure is probably the most important part of this, right? Could drivers and other parts be replaced yet still reproduce the quality tones that John was inspired to create?

Sorry for the ignorance here. I'm just getting into the hobby but I did not expect to be diving in this soon like this.  

"I assume the craftsmanship of the enclosure is probably the most important part of this, right?"

Not really, the drivers, the crossover and the enclosure are all equally important as they work as a unit. The drivers can be replaced or serviced as can the crossovers if needed. Don't worry about that, just buy the da*n speakers and be done with it. Then we can move on to what you will power them with. You have to start somewhere, we all did.

Alright dill, you drive a hard bargain. I'll be picking them up tomorrow. 

Excellent!