Focal Profile 918 presentation

I like those Focals! They were imaging and transparency champions when I heard them.

Imaging and soundstage will probably be best up to 2-3 feet out from rear wall and not too close to side walls. You might want to toe in slightly as well. Make sure speaks are not too far apart and that sounds that should come from front and center do. Keep adjusting until everything comes together nicely.

I put acoustic panels (sound deadening) behind and the side of front speakers to eliminate that problem. I assume you are already tried to toe-in, toe out? How far have you tried setting them apart?
Good luck.

No, I haven't tried to toe-in yet, that will be my next step. I'm waiting for my 11X15X2" Maple Speaker Plinths with 1-1/2 cone spikes. The factory spikes are useless with my carpet. The speakers are kind of floating on the carpet. The speakers are 7 feet apart, 32" from the rear wall to the front of the speaker, I guess I'm there Mapman, and about 18" on the one and 34" to the other side to side walls. Next step: I have 36X48X1" acoustic panel on the way too. As you suggesting Nasaman, it's going between speakes on the front wall. Thanks guys,keep it coming i'll keep you posted on my progress. I can tell you now, that 918 are so easy to listen to, or is it Dialogue Two amp? Thanks.

Wow, all of the stuffs that you are getting...you are heading the right path. I just hope your acoustic panels be 2" thick instead of 1". Anyways, pretty sure you'll be so much happier AFTER you put the speakers on top of the maple and SPIKE them up. The bass will be much "tuneful" when moving the speakers around. Just curious where and how much are you buying the maples?
Note: even if you can max-out its full potential, the Focal 918's are limited and still being considered as entry level speakers in the world of 2-ch.

The maple comes from friend of mine: he had leftovers from his kitchen remodeling project….i just had them cut, stained with the ebony Minwax and protected with the clear satin Polyurethane…..Man; they turn out really sharp. I bought two sets of 1-1/2” cone spikes on eBay, $25 for set of four. I’m not sure about the sound improvement yet, but they are rock solid now. Yes Sir, I like them a lot. I didn’t get a chance to install the panel yet. I was thinking adding two diamond shaped 18X18X1” pieces on top of my panel too.
Yes, thanks for pointing that out; there are better systems out there. Unfortunately I have my other hobbies to maintain too, and I’m married …and I’d like to stay that way too.
The point is that I wanted make sure that I’m getting every penny out of my system. Thanks.