Free Tip for Jumpers

BTW, it works with aii speaker jumper cables including whatever comes with your speakers, without an upgrade, but the upgraded speaker jumpers might sound better.

The effect is astounding, with greater focus, detail and less haze and grain.

Yup, I’ve been doing this for years in my bi-wire configuration due to the urging of Chris Sommovigo from Black Cat, Stereovox, Stereolab, etc. and have experienced these same results along with notably tighter bass — I was shocked. While I might not go as far as calling the improvement “astounding,” it’s plenty significant enough that I’d never listen without the jumpers. I’m of the opinion that cost-effective jumpers from the likes of DH Labs, etc. are perfectly fine for this application, so I view this as a very worthwhile and cost-effective tweak.

Go to partsconnecxion. Buy Neotech awg 14 solid core Occ Teflon wire buy 3 strip the ends  and bend the ends and connect  the highest purity for under$30  highest purity wire and great sound , you don’t need connectors bend the endsforspadeor banana .sounds excellent .

Right, Lak. Mine are a modest after market buy from World's Best Cables.  But this placement is so good I wanted to share with others. 

I  would like to see if the consensus here is that the OP's suggested wiring is the preferred choice rather than the reverse, that being red lead to tweeter and black lead to midrange/bass. I could test this out myself but, access to one speaker is very limited in my secondary system. Seems to me that Vandersteen suggests this idea also.