2. misc-audio
  3. 163305-12747

FUSES, Finally!?

     I have been adamant about avoiding special fuses, because of the lack of empirical studies.  Here is my question:  What would be something not too expensive that would be a good start.  I use three dual mono Audire amps (for Woofs, Mids and Tweets, and Subs, each of the six channel having four fuses.  I would not not want to spend thousands, even if I could, just to experiment.  My heat sinks do unplug, along with the outputs, and I could try just one channel or one amp.  Paul of PS mentioned what they use, and that might eventually be a possibility, but what do you guys (and gals?) think I should do, to just to convince this ageing skeptic?  Also, each channel of my amps has one single, dedicated computer chip that regulates the filling of the 4 26,000 mf caps (per channel), which might make any difference less than a design that allows a flood of electrons into the tank, presuming that might matter.  DanV
danvignau
nonoise's avatar
nonoise
11,226 posts
 
Yup. Those are the ones I saw before. I always thought it’d be nice if they could be used here, stateside.

And, thanks for the heads up on the Acme Audio fuses. Their price is very reasonable so I bookmarked it for future reference. In fact, I may try them soon.

https://acmeaudiolabs.com/products

All the best,
Nonoise
danvignau's avatar
danvignau OP
935 posts
 
The main reason I have been such a fuse skeptic is that I assumed the fuses were not in the audio path.  The ones in my amps certainly do not seem to be.  I did used to use in line speaker wire fuses for my Phase Linear 400 powered Advents, but that was nearly 50 years ago.  The NASA Apollo circuit breakers I mentioned are really only used as power switches.  They are really robust.  I do agree, right or wrong for now, that the bass should be least affected.
mrdecibel
3,179 posts
 
@danvignau , Speakers or no speakers, amp chassis' have vibration and resonance, Do as I suggested, and live with it a while. You ears will tell you the truth. Do all of the fuses....I have my predictions......
georgehifi's avatar
georgehifi
10,312 posts
 
nonoise  I don’t see how his posts aren’t automatically removed for the bile and insults he constantly uses.
danvignau O I did not find Georgie to be so demeaning. I agree with him

Thanks dan, he only said that because he put himself into the snake oil group I was generalizing about, that also say AC fuses are directional.

Cheers George
audioman58's avatar
audioman58
4,404 posts
 
Fuses absolutely make a difference ,the stock steel fuses tons of resistance , Copper or Silvers 4 x better conductor .
I use on power cords and fuses Furutech Nano fluid which is nano particles of Silver and Gold and fills in the voids ,or pours in metal.
takes 75-100 hours but a noticeable increase in resolution ,system dependent of course.  after seeing on Stereo times best of 2020
$2200 fuses ,that's just insane IMO , the Synergistic Orange at $160 is steep for a fuse but worth the results. Synergistic will be coming out with a even better fuse ,this year I heard  when  is  anybody’sguess and I would imagine creeping up near the $200 mark.
More to discover