First and foremost , screw the subfloor every six inches along the floor joists . Stagger the pattern from joist to joist. Start 3 inches away from the wall on the first joist then six inches away from wall on second joist then back to 3 inches then six again . DO NOT use drywall screws . Buy the proper screws . This is not overkill but properly done . The special underlay spoke of previously is a higher performance of the years back when waxed paper was used . The newer material offers some but limited dampening or vibration control . It,s main job is to eliminate the possibility of squeeks occurring through natural shrink and expanding of real hardwoods . When laying any floor the first layer is more importantly done properly as it is the foundation your finish floor sits on . By screwing the subfloor down properly you tie it in firmly with all the joists as if it was now one peice or slab . Real 3/4 inch hardwood is the best for durability and as stated the laminates are thin and noisier . Also never never glue down a real hardwood floor !! It must be able to expand and contract freely with the seasons or it will split crack and squeek . The glue will stay put the wood will not . Laminates can be glued but myself I never recommend them unless thats what people insist on . They don,t last as long and if there is a need or a want to remove them , because they are glued the subfloor is ultimately damaged as well . The floating floors for a room to use as your dedicated sound room I would not recommend .Laminates floating or glued are best used for basements, laundry rooms and bedrooms . Ultamately because the hardwood will not go more than 8 inches past the front of the speakers the carpet will play a bigger roll in affecting the sound . You stated tentavily . I have had and those I have installed floors for as well have had better results for a listening room with a complete hardwood floor then using some area rugs . Cheers
Harwood Flooring Information For Dedicated Room
I am seeking advise on hardwood floor installation for my dedicated sound room. The wood flooring will tentatively be used on only 1/3 of the floor - the speaker end of the room. The hardwood will end about 8 inches in front of the speakers such that the speakers will be sitting on the hardwood and fire into the carpeted end of the room. The room is on the second level with a wood subfloor on 2x10 joists. Speakers are Dunlavy SC4a on Sistrum SP101 stands.
Should I use...
Real Hardwood?
Engineered?
Floating?
Nailed down?
Glued?
Underlayment or directly to subfloor?
Any information would be much appreciated. Thanks so much for your experience and expertise!
Should I use...
Real Hardwood?
Engineered?
Floating?
Nailed down?
Glued?
Underlayment or directly to subfloor?
Any information would be much appreciated. Thanks so much for your experience and expertise!
- ...
- 8 posts total
- 8 posts total