Has anybody tried the Reed 3P?

Dear Sonofjim, I am, I think, even worse. I adjust my carts only once ( troublesome enough) and don't bother further about any, uh, parameter. But when I buy an tonearm
I want all the extras. Asking for the reasons in our hobby is only a way of speaking...

Regards,

Nandric, I was not aware that the headshells were interchangeable. From looking at my 3Q there are two screws to undo the headshell. One that adjusts the azimuth and one that attaches the pivot point. I would think that the screw that goes through the pivot point would be critical. I have not removed the headshell before but if its not installed with the right tork then I'm guessing the sound may be affected. Does Vidmantas specify a tork setting for this screw?

Azimuth adjustment at the headshell is nice but I'm personally more concerned with overall sound quality than the method of azimuth adjustment. If the 3P sounds better then thats what counts to me.

Sean

Dear Sean, I was also to slow to to see the 'light'.
But you need to unscrew just one screw to exchange the cart
holder. The Allen keys are everywhere obtainable. The azimuth part is a separate option and has no connection with 'cart holder' exchange. You may but do not need to use (or order) the azimuth part. The long screw which keep the cart-holder connected to the armwand needs a very small Allen key. I own many of those because I am a tonearms addict.

Regards,

Hi nandric, it is sincere. If u can adjust at the headshell, that seems best. And fine tuning by ear can never hurt....

Dear Jfrech, For my other tonearms ( the Triplanar and the
Reed 2A are 'fastened' to my Kuzma S.R) I always buy headshells with azimuth adjustment. One never knows in advance how the stylus of some cart is glued or fastened to the cantilever. The cantilevers are also not always as
they should be. So the azimuth provision is a kind of precaution in my opinion.

Regards,