Have New L.K.S. HM-DA9038 with Oppo95 won't play SACD's, HDMI input on DAC is for 12S data


Sorry, I'm new to the site and misquoted the product name of my new L.K.S. DAC HM-DA004 with the upgraded USB port. 
I purchased this new DAC , L.K.S. Audio HM-DA004 , I really liked the spec’s and what it had to offer with the intent on improving the CD/SACD experience. I’ve got hook up to my system: Sunfire TG IV preamp, 3 X-Carver m-500T’s Mkll’s , Oppo 95, dbx-360 venue for speaker mgnt./eq. , Snell’s C-7s tower fronts, Polk Lsim 707 back surround. I do like initially what it does with the redbook CD’s, But I can’t get it to play SACD’s.
I didn’t know that the HDMI input on the L.K.S. HM-DA9038 was not capable of recieving regualar HDMI input. The HDMI input has been converted to a 12S audio input, but I believe its states it’s capable to receive DSD files.
I’ve read some of the treads on the new DAC from the Forum, Has anyone found this an issue and is there any way to make the DAC Capable of receiving SACD info. When I play CD redbook, I play it through the Hi Def Coaxial cable input and it plays and show’s that receiving the data at PCM 44k, But as soon as I put in a true SACD , Steely Dan’s Aja, it show that it’s not receiving any data. Any help with would be Greatly appreciated. I’ve had this for a few days, and if it’s not able to SACD’s I’ll be returning it. Thanks for your info and help.

I've seen that there are now some nice Mods now available , is there a Mod available now to enable the DAC to work with Mac's IOS system.Thanks again
128x128dhollywood
@dhollywood,

You can only run SACDs through the LKS (or almost all separate DACs that will accept .dsf files--and not all do) if you rip the SACDs to the .dsf files. Otherwise you will have to run your SACDs through your Oppo and its built in DAC, ignoring the LKS, using the disks.

You ask about how I use my phone. I have ripped all my CDs and SACDs and gathered other music by downloading PCM files all on to a hard disk. Initially it was a small USB disk. Now it's a Synology NAS. That disk is plugged into a small lap-top near the audio system on which I run JRiver. (The NAS can send the music files to the lap-top by wi-fi, but I find the SQ better if by hard wire) There is a USB connection between the lap-top and the LKS. JRiver has a phone app. Bottom line is that I sit in my chair and use the phone app to call up any of the music on the hard disk. I don't do network streaming, but if I wanted to I could just receive the streams through the lap-top. (I also run JRiver on an office desk top so I can listen to all of the music there too. JRiver converts the .dsf files to PCM for that computer. I use the desk-top for all the ripping and file management.)

With a screen between the speakers I do video with disks on the Oppo and sound out to the LKS, also youtube music through the Oppo using the coax connection.

Another option, but just for playing PCM files, as from the CDs, would be to use the Oppo 105 phone app to call up music from either of the hard disks and play them through the Oppo and to the LKS using the coaxial or optical connection.

@mahler123,

Ripping SACD disks is not "complicated". It's even easier, once set up, than ripping a CD though it takes a little longer as the files are larger. I do is put an SACD into the Oppo, bring up a small (free) program on any of the computers and press "execute." That's it. I'm sure you can set it up and do it. You might, as I did, even find an improvement in the SQ.

Yes, ripping all the disks and setting up a management system can be major chore. I found JRiver to have a long learning curve--but in the end it's really a great system to have where anything can be called up to play at your whim, and anywhere on the network, and without leaving your chair. And you have the NAS. For classical music listening especially, it is great to be able to quickly compare performances. You seem to have a large collection so I can understand the hesitation. But, on the other hand, keeping track of a large collection can be made much simpler with a good digital file system.
Thanks for a good input  Melm, and others. I do have everything running, and as you said for the CD’s, I am running through the L.K.S, and the SACD’ through the Oppo using the oppos Dac. Once I got all done, it’s really easy to toggle between two using the DVD for the L.K.S, and CD for the SACD’s.
Your right about hesitation on ripping the Disk, But I really don’t have so many that it would be such an issue. I do want to get the best SQ as possible, and if that’s running from a Hard drive, that’s really not to big of an issue. Just need to figure out how to tie it all in with using IOS, I’m sure there’s something out there. I would like to run everything off an IPad mounted from the wall, just need to find out the best way. 
What’s the option of the MODs being done to the L.K.S out curiosity. 
As you can see, I’m really new to the DAC world, and what can be done. With the different FIR filters on the DAC, how can I find data on what they all do, and what filters are used for the best results and purpose. I havn’t found any data on those so far. I do like the idea of having the music all on a Hard drive, I just need to researching that 
also and how it best done.
Thanks again
The most complete info on this DAC and possible mods is here:
https://www.head-fi.org/threads/l-k-s-audio-mh-da004-dual-es9038pro-dac-van-dammes-double-impact.840...
All 1856 posts.  Happy reading.

Posts about the LKS 004 DAC actually began at the LKS 003 DAC thread around here:
https://www.head-fi.org/threads/lks-audio-mh-da003.745032/page-48

You could also look here:
https://audiophilestyle.com/forums/topic/31270-lks-audio-mh-da004/

Frankly, if I were you I would ignore all of this for a while and simply enjoy the DAC.  Putting your CDs on a hard disk and working out a convenient file system will pay rewards.  It's also not hard to rip your SACDs.  IMO the DAC is really quite fine out of the box.