More detailed comments forthcoming, but Princi and I are in complete agreement; mic overload and all. Â
Hear my Cartridges....🎶
Many Forums have a 'Show your Turntables' Thread or 'Show your Cartridges' Thread but that's just 'eye-candy'.... These days, it's possible to see and HEAR your turntables/arms and cartridges via YouTube videos.
Peter Breuninger does it on his AV Showrooms Site and Michael Fremer does it with high-res digital files made from his analogue front ends.
Now Fremer claims that the 'sound' on his high-res digital files captures the complex, ephemeral nuances and differences that he hears directly from the analogue equipment in his room.
That may well be....when he plays it through the rest of his high-end setup 😎
But when I play his files through my humble iMac speakers or even worse.....my iPad speakers.....they sound no more convincing than the YouTube videos produced by Breuninger.
Of course YouTube videos struggle to capture 'soundstage' (side to side and front to back) and obviously can't reproduce the effects of the lowest octaves out of subwoofers.....but.....they can sometimes give a reasonably accurate IMPRESSION of the overall sound of a system.
With that in mind.....see if any of you can distinguish the differences between some of my vintage (and modern) cartridges.
VICTOR X1
This cartridge is the pinnacle of the Victor MM designs and has a Shibata stylus on a beryllium cantilever. Almost impossible to find these days with its original Victor stylus assembly but if you are lucky enough to do so.....be prepared to pay over US$1000.....🤪
VICTOR 4MD-X1
This cartridge is down the ladder from the X1 but still has a Shibata stylus (don't know if the cantilever is beryllium?)
This cartridge was designed for 4-Channel reproduction and so has a wide frequency response 10Hz-60KHz.
Easier to find than the X1 but a lot cheaper (I got this one for US$130).
AUDIO TECHNICA AT ML180 OCC
Top of the line MM cartridge from Audio Technica with Microline Stylus on Gold-Plated Boron Tube cantilever.
Expensive if you can find one....think US$1000.
I will be interested if people can hear any differences in these three vintage MM cartridges....
Then I might post some vintage MMs against vintage and MODERN LOMC cartridges.....🤗
Peter Breuninger does it on his AV Showrooms Site and Michael Fremer does it with high-res digital files made from his analogue front ends.
Now Fremer claims that the 'sound' on his high-res digital files captures the complex, ephemeral nuances and differences that he hears directly from the analogue equipment in his room.
That may well be....when he plays it through the rest of his high-end setup 😎
But when I play his files through my humble iMac speakers or even worse.....my iPad speakers.....they sound no more convincing than the YouTube videos produced by Breuninger.
Of course YouTube videos struggle to capture 'soundstage' (side to side and front to back) and obviously can't reproduce the effects of the lowest octaves out of subwoofers.....but.....they can sometimes give a reasonably accurate IMPRESSION of the overall sound of a system.
With that in mind.....see if any of you can distinguish the differences between some of my vintage (and modern) cartridges.
VICTOR X1
This cartridge is the pinnacle of the Victor MM designs and has a Shibata stylus on a beryllium cantilever. Almost impossible to find these days with its original Victor stylus assembly but if you are lucky enough to do so.....be prepared to pay over US$1000.....🤪
VICTOR 4MD-X1
This cartridge is down the ladder from the X1 but still has a Shibata stylus (don't know if the cantilever is beryllium?)
This cartridge was designed for 4-Channel reproduction and so has a wide frequency response 10Hz-60KHz.
Easier to find than the X1 but a lot cheaper (I got this one for US$130).
AUDIO TECHNICA AT ML180 OCC
Top of the line MM cartridge from Audio Technica with Microline Stylus on Gold-Plated Boron Tube cantilever.
Expensive if you can find one....think US$1000.
I will be interested if people can hear any differences in these three vintage MM cartridges....
Then I might post some vintage MMs against vintage and MODERN LOMC cartridges.....🤗
- ...
- 628 posts total
Is the HE referring to hyper elliptical stylus btw ?I think you might be right..... I thought the ML could stand for 'MicroLine'...but the specs call it hyper-elliptical. Imagine back then....we had the technology to produce, not only solid beryllium but also HOLLOW beryllium cantilevers. They could also produce hollow boron and titanium cantilevers. These days, the only HOLLOW they can do is aluminium. For boron, sapphire, ruby, diamond....solid is the only choice. BTW....the SAS stylus for the V15/III is on a solid boron cantilever. |
Yes indeed in the glorious 80´s we had hollow beryllium cantilevers with very low moving mass. The finest of SHURE was ULTRA 500´s 0.165 mg and ULTRA 400´s 0.195 mg which is an improved version of the ML140HE. Found this: An estimated list of Shure cartridge rankings, best first, rankings based on tip moving mass and trackability, magnetic core type and stylus shape:
All in all, it´s just such a pity that Shure discontinued their better models. |
All of the above cartridges, except for the Type III models, have Shure’s Dynamic Stabiliser brush, which damps tonearm/cartridge resonance, short circuits record static electricity to ground, and removes dust from ahead of the stylus.ÂI preferred both my V15vxmr & V15vmr with a brazillian and a dab of superglue on the stylus holder - as used in my Eminent Technology ET2. Accurate tonearm set up, properly grounded TT & clean records obviate the need for heath robinson type solutions.  |
I preferred both my V15vxmr & V15vmr with a brazillian and a dab of superglue on the stylus holder - as used in my Eminent Technology ET2. Accurate tonearm set up, properly grounded TT & clean records obviate the need for heath robinson type solutions.I agree..... The Dynamic Stabiliser also acts as a stylus protector so I just keep it in the fully 'up' position when playing a disc. |
- 628 posts total