2. amps-preamps
  3. 1268008775

How much better will a preamp be over a processor

I've had a dedicated theater room for over four years now, and have enjoyed it very much. Over the last couple of years I have changed the equipment around quite a bit for many reasons, but the main one has always been to improve upon the sound for two channel listening.

The first piece I upgraded was the amplifiers. I went from a five channel (Anthem P5) to a pair of Theta Citadel 1.5's. I kept the Theta's for about a year and sold them to move on to a BAT VK-600SE in November 2008. I went with the BAT based on the strong recommendation of a fellow enthusiast, and have to say I've liked it much better over the Theta's.

Last April I had the opportunity to buy a pair of Aerial 20T v2's. I couldn't pass these up at the price and traded my Aerial LR5's in on them to help with the cost. These have been the single biggest upgrade I've experienced in my system as far as the over all sound goes.

This brings me to my question. I am currently using a Denon AVP-A1HDCI processor for all the processing and preamp duties. My plan from the beginning was to get a dedicated two channel preamp to go along with the Denon or whatever processor I would be running. Like many others the poor economy has caught up to me and buying something like a good two channel preamp is now a bigger deal than what it was two years ago. My plan was to be patient and buy a used unit here from Audiogon and try it, if I didn't like it resell it and take a small hit from what I payed and move on to the next one to try. Now this doesn't seem to be a smart thing to do (Maybe it wasn't before either?), so I'm hear asking for your guys input.

My initial plans where to get a BAT VK-52SE to run along with the Denon processor, but I've done a lot of reading over the last year or so and there seems to be a lot of options. I'm also interested in products from Ayre, Classe, Anthem, and ARC. I am prepared to sell the Denon and the BAT amp and start over, but it would be nice to just keep one or both and make something work. I still have the BAT VK-52SE or BAT VK-42SE at the top of my list, and really consider these to be the front runners for me, however I've talked to a few people who have gotten the Classe SSP-800 and rave about it. One person I spoke with even got rid of there ARC ref 3 after getting the Classe. He told me the Classe didn't have everything the ARC ref 3 did, but it was close enough not to worry about. This is how I feel as well, if I'm going to spend this kind of money I want a significant improvement not a small one.

I know there are a lot of variables in all of this and I'm sure there will be many opinions. I'm sure the first thing I will be told is to go listen to the products I'm interested in, and that is best thing to do, but I live out in a rural area, with most dealers being two to three hours away. I work six days a week now and Sundays is for the kids. I also don't want to go and take up a dealers time only to come home and buy something used from Audiogon. I just don't think that is right, besides what sounds good at the dealer might sound horrible when you get it home.

I basically have two questions for you.

What type of improvements should I expect by going to a dedicated two channel preamp over my current Denon processor.

Can a higher end Processor like the Denon, Anthem, or Classe provide a two channel experience comparable to a dedicated two channel preamp.

Thanks for your guys input.
audiodreamer
srwooten's avatar
srwooten
694 posts
 
Do you want the highs smooth and natural sounding, or rolled off? Good SS gear does not roll off the highs (IMHO) but instead retains the natural sound of the highs. I absolutely relish the way cymbals sound on my kit.
blindjim
3,092 posts
 

Inherently yes… a tube preamp will allow for some lessening of top end energy as a rule, although I’d say don’t let that scare or annoy you, as this effect is by degrees primarily and usually not night and day sorts of differences.

The rule of thumb I’ve discerned so far on the affect of a tube preamp is that they afford a greater ease to the receipt of the sound itself. Better decays, and more harmonic resonance.

This ‘affectation’ can be either very great or simply noticeable. And there’s the rub for some. It’s not extremely promising of any exact outcome, offering more so mere vague notions which while in one’s mind can become magnified without due cause and wind up as offputting.

And there too is the lure of tubes in the power train, simple pure end user flexibility. The ability to amend or attenuate the signal without degrading it just by exchanging tubes within it’s company.

In the most generic of ways, people say rolled off when speaking of tubes, generally. It’s not correct IMHO. The bite can and often is reduced from the usual overemphasis of most rock & pop recordings when the application of a well designed tube device is on the job.

I feel a better terminology would be to say the highs are made more natural. Of course this variable concerns itself with just how good a tube this or a tube that is in the system mix. To some degree too, those tubes within it as well. Adding a nice tube pre with very dynamic and extended tubes in it’s compliment isn’t going to provide quite so much change, as if it’s compliment of tubes were rolled towards a smoother sort instead.

I know some SS preamps which sound quite different from their own amplifier counterparts too. Krell for example has some very dynamic amps, but their preamps aren’t quite so aggressive. I’d assume other makers could take that approach too.

A very good post was made here above regarding the type of music you will listen too going forward and the choice of preamp for it/them… if rock and pop are your bread and butter, and all else is disinteresting and likely will remain just that way, go with SS preamps. They’ll cost you less money than tubed preamps will and you’ll have all the extension and speed those genres require.

Back when I was considering adding a SS preamp simply for another take on the music and as a backup only, a friend here mentioned to me the Rowland Capri. They aren’t way pricey and resell quickly. Past that I’d consider Levinson or McIntosh, as I’ve heard some from both of those makers SS units.

With that BAT amp I’d first think of looking around for a good 51SE too. I know of a couple friends who own those and their accounts to me on them don’t show them up as your more harmonically rich and somewhat slower paced tube preamps… but you’ll also find that as the price goes up on tube preamps, so too will all the other audio nut agendas… PRAT, extension, inner detail, etc. And it’s a 100% balanced design with that inherenet synergy of the BAT sound!

Again, FYI, there are tube preamps out there today which when eye’s are closed, are very difficult to tell from SS preamps. I’ve never understood the why of that prospect though, aside from many have been intended for use in some HT rigs as they have the ‘HT bypass’ option built into them as std.

Have fun
spatine
84 posts
 
You might consider reading Audiophile review on the Bryston SP2 which is a pre/pro with a bypass for 2-channel music listening. After that in my opinion, you really should audition this piece, and demand the dealer to combine the SP2 (in bypass mode)with his best system. I am talking about equipment costing over $10,000 per piece for the remainder of the system. You'll be surprised. I own the SP2, use it for both music and movies, and have to admit that Audiophile is right on the money for this one.
spatine
84 posts
 
My mistake ... I mean Stereophile, and not "Audiophile". Just type in keywords stereophile, bryston & SP2 into Google to get the review.
appassionata
5 posts
 
You have and have had very good to excellent equipment and you have a very well done theatre and listening room. I would recommend a good tube pre-amp for the stereo music. My personal favorite that I have listened to extensively at a friend's place is the Wyetech Labs opal pre-amp. But there are many others as well.

The other big changes are actively bi-amping your Aerial 20t'S and concentrating on the digital to analog conversion. Vinyl is in a different class and speaks for itself.

Good luck with your choices!
More to discover