Every time I (or someone else) tried, it worked!
How to select a good Speaker Cable
Speaker cables do have a significant role in how our system sounds. Different cables sound different.
So which one is the right one for you?
The Speaker Cable is an extension of the Amp. and not an addition to the speaker's load. It shall have a certain resistance (low) not to spoil the Amp's DF figure. As so, it can be calculated and there is a formula to do it.
The higher the Amp's DF, the lower the Speaker Cable's resistance shall be. As today SS power Amp's get DFs of 400 and above (Digital Amps go by thousands) the cable of 10 ft (3m) long, gets as thick as 0 AWG.
I can see your eyebrows elevates, when that thick cable is to be deal with. Most Speaker Cable makers skip it because of that. So most cables on the market (regardless of the look or price) are of 14-12 AWG. Way less that supposed to be.
Worst! no Speaker Cable maker, dealer or seller knows the answer, of what is the correct cable for your system.
So most of us ended up, with a cables too thin for the task.
A conducted test, on this site, about a year ago as well as with some closer friends, shows a significant improvement with a calculated size cable over their previous cable. The results were all positive and preferred the calculated cable.
So, instead of asking: which of two brands, or two prices or two colors of Speaker Cable do I need, you should ask how thick of a Speaker Cable do I need.
I'll be happy to provide you the calculation, for who request it. All you need to provide is:
1). Length (Ft. or meter)
2). The Amp's DF figure.
Thanks
- ...
- 199 posts total
b4icu OP406 posts08-24-2020 10:14pm" Tube Amps have low DF so cables won't change the sound a bit. If the cables are meant to end up with a tube Amp. don't bother at all." Wrong. Even my friends tiny 3.5W 2A3 SE-amp grew up when given 9awg solid copper. (no stranded distorted junk here please) Instead of using 0awg stranded, 7awg solid will outperform it by a mile. Be aware though that the solid conductors will need up to one hour of heavy high-power massage to open up. I discovered this back in the 90`s. This and a lot moore. |
Mr. unfairlane
If you would be kind to read back a bit, you would find out two major things: 1. The calculation works, 2. If you connect a thicker cable than required by calc. it will not improve sound. For a tube amp. with so many floues, the cable is minor. I see you promote the solid cables agenda. It is BS. Go sale it elsewhere. |
- 199 posts total