2. amps-preamps
  3. 181284-111795

Hum on Tube Amp - Can't find source

I have a hum (60hz) I can hear on my speakers and it happens with my tube monoblocks (either of them).  With or without interconnects, it even happens on either amp (have tried one at a time) with every circuit on the house tripped/disconnected, every other component disconnected from the wall (including the Internet/CaTV line) and no interconnects.  

One amp has it as soon as it warms up whereas the other one is intermittent.

Hum X doesn't solve it, iFi Ground defender either, AVA HumDinger on powerline  doesn't solve it either.

I have replaced the tubes and both amps were just tested at the factory.  Replaced the circuit breaker, tightened every wire on the breaker box, checked and cleaned all connections to ground rod.  Added a hum eliminator to the internet line.

Hum cycles a bit with the tube glow matching the cycles.

I'm waiting on the power company to come check the power coming to the house.

Thoughts?

ervikingo
Post removed 
Post removed 
stevencason
93 posts
 

I had this issue for years.  Turned out to be my Rel subwoofer.  I grounded it to the preamp and it disappeared.

dpop
293 posts
 

@ervikingo

When it comes to AC power, audio gear, or electronics or electricity in general, I have never seen or heard anything like that ever before. Thanks for sharing the video! Wow, WHAT is going on here? And both amps do this?! Plugging one of these in at a completely different location should also tell us something. Has that been tried yet?

@jea48

did you start up the generator and transfer the load of the ATS to generator? You would be off line of the Utility Power Co...

Great suggestion! Since you can’t just pull the electric company meter to simulate a power outage, the ATS would need to have a special function switch to power up and transfer the load. Not all ATS’ have this switch and function, but it’s worth a look. Many generators and ATS’ have test switches, but don’t always transfer the load.

@stevencason

I had this issue for years. Turned out to be my Rel subwoofer. I grounded it to the preamp and it disappeared.

Crazy.

@jea48

Are you sure that is the whole house SPD, (Surge Protection Device) you have?

Good call! Let’s see. Hopefully it’s the TPS3A11 version, if the service drop is single phase.

Siemens TPS3 External or Wall Mounted SPDs

holmz's avatar
holmz
2,328 posts
 

The sound in that video sounds like “motorboating”.

More to discover