2. digital
  3. 144115-118117

If you want to get the best of your transport, try this.


http://www.symposiumusa.com/rollerblocks.html 

I had used these three roller blocks under CEC TL0x for 5 years about 15 years ago and now I am using them under Jay's Audio CDT2 Mk2.

There are two different balls. If you can afford, the super ball is recommended for more effect.

With these roller blocks, transport give higher resolution and sharper focus.

I think it's effect is more than good digital cables.

But I recommend combination of roller blocks and good digital cable to get the best of your transport.
128x128shkong78
mzkmxcv
777 posts
 
@jtcf

But it is definitely not able to track accurately and there will be missing information.It’s been demonstrated,measured, and proven time and again.


I would love a link. 
 
Then what do you say to the people that rip their CD’s (most using the ones in their computer) and use checking software to make sure it’s bit-perfect?
nonoise's avatar
nonoise
10,896 posts
 
Getting back to the OP's reason for this thread, here's another similar way that is less expensive but seems to do the same thing:
http://www.ingress-engineering.ca/products-and-services.php

All the best,
Nonoise
shkong78's avatar
shkong78 OP
1,485 posts
 
@zipost

All the tweaks are dependent on system and personal taste.

You have to try it in your system to find out yourself.

it may not work in your system.

This rollerblock had been around for 20 years.

I had been using it for more than 17 years.
geoffkait's avatar
geoffkait
23,365 posts
 
The roller bearings are excellent for isolation in the horizontal PLANE 🔛 AND the rotational directions 🎡 around x, y, z axes but are rather timid in the vertical direction, which is a rigid connection, and which might actually be the most important direction. 🔝
uberwaltz's avatar
uberwaltz
13,381 posts
 
@nonoise 

Interesting alternatives but.....
If only one half of the bearing is semi captive what is to stop whatever piece of equipment that is sitting on top of the bare bearings committing the audio equivalent of a Wal-Mart shopping trolley esque suicide?

I can just picture pushing a button on a CD player and the whole goes flying backwards skidding of the bearings!

Or am I missing something here?
More to discover