Infinity Kappa 9's sound terrible...HELP

Thanks Roy!

I have my Kappa 8’s sounding great now using a BAT VK-500 on the lows and a David Berning ZH270 on the mids and highs.  There is still some tearing/papery/spitty/white noise distortion type sound making sibilants a bit too broad or lingering but other than that I am at 95% satisfied.

The Kappa 9’s I have pretty much given up on. I need to crack them open and check all the wiring and crossovers. In general I think they are just too big for my 12x17 room.

So which amps would you recommend? And any ideas on taming the odd sibilants I am getting with the Kappa 8’s?

I am using a ModWright Oppo 105 D with Tung-Sol new production tubes and a Sonic Frontiers Line 2 pre amp.

Thanks!

Hi i owned 8's and never ever heard that(used Accuphase p102 and Audio research Classic 60 etc when i had them ) perhaps the Emit needs sorting is it in both sides? First step would be check the crossovers and make sure that is in spec - I have seen so many hacked speakers it is sad - i have no idea who to trust over there but swapping Emits out(with the 9 pair) and using a test cd may help isolate the problem .It could still be the polydomes at the upper end of there range -maybe get a pair of those black drop in replacements and see what happens. Both sets of speakers 8's and 9's should sound competitive with modern day speakers if in perfect condition .
In Germany there are a couple of experts who apparently even get the Emits redone and after these guys do the speakers up supposedly better than new - note not cheap i believe but apparently well worth it -there is an article in the German stereo magazine that you can download -not sure what issue now - think in the first 6 anyway get in touch with that guy I will post a link to the Magazine site -even ask the editor 
https://stereo-magazine.com/
cheers

Hmm, I posted something yesterday plus a response and an edit but it isn't here today... weird.

I'll repost my quick question... I'm a new 9Kappa owner!  After 30 years of window shopping someone in my zip code had an estate sale and I ended up with a pair of Kappa 6's and Kappa 9's -- plus a Nakamichi PA-7, Adcom 535, and a LaserDisc player.  Can someone recommend a crossover and preamp for me to use as a first-time bi-amper?  I'm thinking I should use my Parasound HCA-3500 for low pass and the PA-7 for high pass.


The tricky part is that ideally I would like to be able to split 2 channel music into high pass, low pass, and subwoofer ranges -- but would also like 5.1 to work seamlessly.  Does this require some sort of integrated preamp/crossover hardware or is it more trouble than it's worth to make this happen?  With the two 12" woofers, bass is pretty darn good but I expect it will need some tightening up next time I have disposable income to waste.

I need to upgrade my receiver to one that does HDMI switching anyway, so now is the best time for me to choose the right hardware.

Thanks,
Mark

p.s. to anyone whose Kappa 9's are missing bass -- especially if you had a recent re-foaming -- it is quite easy to wire the lower woofer backward due to the color scheme so double check this next if you are sure that the Low Pass/High Pass jumper and connectors are fine.

After doing some reading -- it looks like I should be able to find the crossover I need for biamping at just about any car audio shop.  Is this the case?

After doing even more reading -- it looks like it is common for people to just use a y cable from each channel of the pre-amp to plug into both amps.  This may explain why most threads didn't mention adding a crossover specifically.
Is it really this easy?