Internal Wire Upgrade for SME V

The stock cable on SME V tomearm is GOOD ENOUGH, period.

Internal wiring Capacitance 15.0 pF per channel
Resistance 0.5353 ohms per conductor

It was designed and used by SME engineers for any cartridges mounted on this tonearm, and this is NOT cheap old junk tonearm that require cable replacement.

If you think someone knows secret formula of the silver that is superior to everything else than it’s like saying that SME engineers know nothing about phono cables.

SME V stock cable is the last thing to replace in analog system.

Chakster, of course you’re right. Of course it is “good enough“; that arm’s pedigree is well established. Is it as good as AN or Kondo wire? I don’t know, but if my comparisons to Cardas and Discovery are any indication, the differences are not subtle. So, anyone with an open mind can extrapolate from that. Moreover, we are talking about a couple of different things here. Quality of the wire and its potential upgrade and the opportunity to eliminate at least two plugs and two solder joints from the delicate signal path on its way to the preamp by going “shotgun”. Anyone who hasn’t done or experienced this doesn’t have a clue as to the kind and magnitude of improvement in overall refinement and clarity that are possible by doing this.

I totally understand the concern about possible damage caused by less than expert technicians, but if SME were to do the work as has been suggested, why the staunch resistance by you and others to offering, as the OP requested, impressions based on first hand experience? He can then make up his own mind and make his own decision to go ahead or not. More information usually means a more intelligent decision.

Funny, “good enough” has got to be one of the least used phrases in an audiophile forum 😊

Dear @keegiam : I respect mijostyn but he is only ( I think in good shape ) distressing you in something that is way important for you and that makes a paramount difference for the better, the up-date is real.

And @frogman put the nail where hurts: the extremely sensitive cartridge signal is the one that we want to enjoy at maximum quality level we can achieve and things are that the very first system link that not only touch but that where the cartridge beloved signal must pass through around 1.5m from the output cartridge pins to the phono stage input is exactly the tonearm wire and IC cable.

Other than the cartridge/tonearm ( mechanical match. ) the most importan system link is those ones no matters what. Any tiny cartridge signal you losted in that 1.5m. not only we can’t recovery it’s lost for ever and goes against the quality levels of what we are listening and additional to that a superlative wire as the AN puts lower levels of everykind of distortions developed during the 1.5m. signal trip.

As tou said this is the rigth time to do it for you and think that the rewiring is not at all rocket science as some gentlemans think and maybe they think that way by very low knowledge levels.

If I was you then I go a head with, don’t distress about just do it.

Btw, tell the technician that he uses too female silver conectors in the tonearm rewired input.

Dear @cardani , if I remember you have a true SME expert technician that even refurbish SME tonearms and is in Canada. Maybe you can help to the OP  with the email or something. Sorry to disturb you.

R.

@frogman  : Don't waste your time with so poor knowledge level people.

Ignorance is everywhere in the world.

R.

Thank you all for your views, knowledge and experience.  My choice is now clear: either send the arm to SME to install the AN-to-RCA cable or stick with the original.

I will assess the logistics and costs and reach a decision soon.