Is DEQX a game changer?

drewan77,

I am stuck trying to complete the Bypass profile 0. It seems basic to set up different profiles and be able to select them from the remote, but I can’t seem to get it.

It seems that I can only select one profile from the remote that will play. That is, if I finished the bypass installation on profile 0 it will play on profile 0 but then my corrected profile that I have on profile 1 does not.

When I go back and again set up the profile 1, from the remote I can select the corrected profile 1 but when I push profile 0 (bypass) there is no sound.

I’m missing something, can you understand and help?

Thanks,

ozzy

Note - when the Save All to DEQX button is clicked, all four profiles from the open configuration are saved to the DEQX.  Since all profiles of a new configuration are disabled until you change them, if you install a correction filter in just one profile of a new configuration, then save it to the DEQX, the other profiles of the DEQX will be disabled, irrespective of what those profiles may have been before. 

Note that the DEQX Configurations saved to the DEQX unit have been generated in 'non-real time' i.e. they only affect the processing by the DEQX unit once the Save All to DEQX button is clicked.  This contrasts to changes made in the DEQX Control Panel, which affect the processing on the DEQX in ‘real time’ i.e. any change made in the DEQX Control Panel instantaneously affects the DEQX. For more on this subject see IO Manager in the Reference section.

To save a DEQX Configuration on your PC (not on the DEQX), click on the Save button once you have set up the DEQX Configuration. This also saves the measurement(s) and correction(s) you have created.