Isolation Devices for Digital

I posted recently (2/19/08) over in audioasylum general forum a brief result of my home-made isolator (1-1/2 inch (38 mm) rubber cup with felt pad insert) including picture.

I also came across "the Complete Guide to High-End Audio" by Robert Harley of The Absolute Sound mentioning cones, spikes, isolators. He said turn tables and tube components need isolators in particular.

Rotarius, can you point to some of the "real isolators online" you reference? There are a ton of products with a wide range of effectiveness, but I suspect you're not talking about the products targeted at audiophiles. Just curious...

The stand that stands out as far as bad vibrations are concerned are the Starsound 101 stands that do drain energy one way.These stands rendered a whole new level of sound that has set a benchmark for all of my friends systems as well as mine. Isolating vibes keeps the energy inside the equipmnet and distorts the audio signal vs the draining of energy from the equipment. One of the biggest changes we have heard is to a pair of ML stats after putting 101 underneath them !!Hope this helps Dennis

Samix,
You asked about hand balls. After trying many different types of isolation and/or vibration damping devices, I have found that three handballs under my front end digital equipment with a bit of weight on top, to be the most effective approach in my system, by far. As is often said, "your mileage may vary" in your specific system. Good luck!!

Hi ... I used a set of Mini-Clouds, but I was much more impressed by a set of Yamamoto isolation bases (ebony, not the maples). An immediate improvement that couldn't be denied ... very high quality craftsmanship

If this is a duplicate, I apologize ... my server disappeared momentarily