JOLIDA owners

I have no experience with your cartridge, however you can change the settings on the fly, just don't have the volume of the preamp or integrated amp turned up too much. I have done it many times.

dill, sounds like you own a JD9 II phono stage. If so, the Hana high output
cart specs;
Output Level @ 1kHz: 2.0mV
Output Balance @ 1kHz: Less Than 1.5dB
Trackability: 70 um/2 grams
Separation @ 1kHz: 28 dB
Impedance @ 1 kHz: 130 Ohms
Suggested Load: 47 K Omms

Michael at Jolida says; I would start with the gain on 2 and the capacitance on either 100 ohms or 300 ohms. The ohm options
are pretty obvious, how do you set the gain on 2?

I do own a JD9 II and I also recommend using old stock Telefunken 12AX7's. I know they are spendy, however my unit has not sounded better with any others.
"how do you set the gain on 2?"
I don't understand your question. Here is a chart that I used to set mine.

http://www.audiokarma.org/forums/index.php?attachments/jd9-jpeg.249933/

I don't know either dill. My Michael quote is verbatim. Hopefully an other
Jolida owner will respond with some answers.