Kii Three vs. actives with analog crossover

To clarify my question, I do not care about EQ, room modes, etc. I am interested to hear about experience with and opinions about 3-way speakers employing digital (DSP) active cross-over (examples being Kii Three and D&D8c) vs. 3-way speakers employing analog active cross-over (examples being PSI Audio A23-M, ATCSCM50ASL).
If you look at those examples, PSI Audio A23-M is using propitiatory tweeter and midrange drives developed in house, with propitiatory amplification using unique technology such as Adaptive Output Impedance error correction feedback system which according to them allows for superb control of excursion. They also do phase compensation what is evident in impulse response and transients reproduction. All of this done in analog domain, what according to them is the proper way, not employing DSP. This certainly sounds like proper approach.

On the other hand, Kii Three does active cross-over in digital domain employing DSP. They also do phase compensation as well as cardioid dispersion pattern in low-mids and bass which is certainly beneficial, and their DSP processing seems to be very well done, what is all great, but on the other hand they use off-the-shelf drivers and amplification.

So I am interested to hear how these compare based on actual experience and/or in lack of the actual experience opinions based on some sound engineering knowledge (not marketing info, and not some biased pointless arguments not founded in anything).

I would not get caught up in the after market drivers/amplification vs proprietary thing. The only thing that matters is how it all works together to provide the musical experience that you are looking for. Plenty of possible problems could be had with finding parts if the sole source company goes out of business. Many well known and highly regarded companies use off the shelf because they are that good. Some tweak them a little for their specific design goals. Final implementation and synergy is everything.

Trust your ears and pick the supplier that has the best record for customer service and longevity. I cannot comment on the other differences as they are not in my field of study.

sashav OP
Kii Three vs. actives with analog crossover

Listened to the Kii’s for quite a while seemed to be very detailed, very etched, very impressive, very sterile.
I could not warm to them no matter what the Kii rep tried to make it sound human.
To me there seems to be so much processing going on, it feel/sounds as if it robs all the harmonics from the music, and what your left with is the fundamental with no harmonic decay structure.
And say good by to your cherished dac and amp/s, as they are not needed anymore, you have to use what they give inside, and who knows what they are, as well as being punished by a multitude Class-D amps they use.

Cheers George

“To clarify my question, I do not care about EQ, room modes, etc.”

to further clarify, are these the room modes you are not concerned about... “Room modes are caused by sound reflecting off of various room surfaces. There are three types of modes in a room: axial, tangential, and oblique” 

If these are the “room modes” you are talking about, I think most of agree that they are in fact something you should be concerned about, if good sound is also a concern.  There are of course, different ways to address them.  

@b_limo
Re: room modes, I will deal with them in other ways, it is not not the driving factor, I will not make selection of speakers based on their ability (or not) to deal with room modes through DSP.
I am interested in educated opinions about digital vs analog cross-over speakers and specific examples of both, PSI Audio vs. Kee/D&D.