Koetsu Urushi+SMEV anti skating setting help

There is extensive discussion on these forums on doing it visually (the best method IMO) You can also use a test record that has in/out of phase white noise tracks also discussed here and in the AA vinyl forum.

Many thanks Nsgarch, but I am looking for a direct answer from someone having walked the path I am not ready to walk... A suggested setting from an experienced user is heartly wellcome!!.David

Agondad -- even if you find another Urushi+SMEV owner, and assuming he/she arrived at their setting (properly) through a little practice and observation, your duplicating his/her setting does not assure it will serve you as well. There are still too many variables involved. The visual method is very easy to learn, and the Cardas test record is also an easy way to do it.

A.S. requirements also vary across the record -- luckily the SMEV A.S. force is spring actuated and therefore varies also ;-) The only general tip I can give you is not to use the AS = VTF method of setting AS, because that standard was developed years ago for spherical styli and doesn't apply to modern styli which have far less friction in the groove and require AS settings 20% - 50% the VTF.

Best luck!
.

Agree with Nsgarch. If the SME V is mounted correctly (proper distance from the spindle in the rest position), dialing in the same number on the anti-skating dial as on the VTF dial will provide the proper amount of anti-skating. Those dials are surprisingly accurate. You can confirm your setting with the visual test as also mentioned by Nsgarch.