What exactly do you want to do? LEMO from VPI to one XLR doesn't work, because the LEMO is 2 channel balanced floating (4-pin) and the XLR is 1 channel balanced with ground reference (3-pin). Check www.mr-labs.net and send me an email, I can help you.
Lemo phono connector
Has anyone tried to find a phono cable (VPI table) with a lemo connector? I need .5 meter with a lemo on one end and an xlr on the other. Non of the web sites I've seen mention a lemo. A din yes. No lemo. Does bypassing my connector plate on my turntable do enough good to be worth the trouble?
Thank you
Thank you
- ...
- 10 posts total
John, the link to the Mouser website refers to a similar, but not the correct connector. The mating connector for the LEMO plug as used with VPI arms is the LEMO PHG.0B.304.CLLD52Z, unfortunately not available at Mouser. A workaround is to use the LEMO socket according to this link: http://www.mouser.com/ProductDetail/LEMO/EGG0B304CLL/?qs=sGAEpiMZZMvf6myxbP4FpFBrG%252bqjJSud6JhGEDrCpeA%3d Regards Max |
Can someone tell me the exact model number for the Lemo connector for the VPI tonearm? I would like to make my own Lemo-to-RCA cables. The engraving on the connector says "FGG.0B" series but no indication of exact model. I looked up Mouser catalog and found two similar ones, judging by the pictures, but not sure which one is the exact model for the VPI. I also cannot find the matching female connector. >FGG.0B3.04.CLAD52 male >FGG.0B.304.CYCD52 male So, which one is the right one and which one is the matching female connector? Any helpful info is appreciated. _____ |
Sorry for the bad links above. After thorough visual examining and process of elimination, here's my result. Any error, please correct me. Connector Male = FGG.0B series 4-pin solder type w/collet = FGG.0B.304.CLAD52 Connector Female = EGG.0B series 4-pin solder type w/o collet = EGG.0B.304.CLL Am I close to the mark? _____ |
- 10 posts total