2. analog
  3. 1265171201

Lemo phono connector

Has anyone tried to find a phono cable (VPI table) with a lemo connector? I need .5 meter with a lemo on one end and an xlr on the other. Non of the web sites I've seen mention a lemo. A din yes. No lemo. Does bypassing my connector plate on my turntable do enough good to be worth the trouble?
Thank you
sm2727
jsd52756
430 posts
 
If you talking the Krell Cast type Lemo, try this place;
http://www.mouser.com/ProductDetail/LEMO/FGG1B304CLAD62Z/?qs=MSOc8y6NhWfnXBUWLXHRFA%3d%3d

Good luck,
John
drjoe
130 posts
 
Try Michael Percy audio on line. He may be able to build you what you want.
romaxim
13 posts
 
What exactly do you want to do? LEMO from VPI to one XLR doesn't work, because the LEMO is 2 channel balanced floating (4-pin) and the XLR is 1 channel balanced with ground reference (3-pin). Check www.mr-labs.net and send me an email, I can help you.
sm2727 OP
115 posts
 
Thank-you all for the help. I'll try contacting all three.
romaxim
13 posts
 
John, the link to the Mouser website refers to a similar, but not the correct connector. The mating connector for the LEMO plug as used with VPI arms is the LEMO PHG.0B.304.CLLD52Z, unfortunately not available at Mouser. A workaround is to use the LEMO socket according to this link:
http://www.mouser.com/ProductDetail/LEMO/EGG0B304CLL/?qs=sGAEpiMZZMvf6myxbP4FpFBrG%252bqjJSud6JhGEDrCpeA%3d

Regards
Max
More to discover