Maybe tube preamp


My current setup is Tidal; ifi  nano DSD; Parasound HCA 2200 (recent purchase) ; Magnepan 1.7i  

This arrangement sounds pretty good at low volume with most material.  However I think it would benefit from a preamp.  The ifi's output maxes out at 1.3 volts.  I was thinking the warmth of a tube preamp would be a good match for this setup.  Years ago I had a New York Audio Labs setup. I liked it but it save for the noise floor. My HCA 2200 is blissfully silent. 

My budget is about $1,000

Advice?

128x128markainsworth
You have to call upscale and talk to Kevin to get a Jumbo Shrimp. The Shrimp is a older unit. You can find a Jumbo Shrimp for $2500 or less if you look around. Also, the J shrimp does not have a phono section ( thats a chinook) it is strictly a line stage pre amp.

I have owned the Modwright SWL 9.0 Sig edition with tubed pwr supply, this unit I supplied with tubes from Andy at Vintage Tube Services. It is a wonderful sounding unit with awesome beauty of tone and great harmonics, very rich and warm sounding but the bass was a little less defined and punchy then the Jumbo shrimp imo, the volume control on the Jumbo Shrimp is what its all about, its a tubed controlled circuit (and when u turn the knob it feels a little nicer even though it is also ALPS)! the Modwrights Alps volume is UN inspiring. This unit is in my fathers system so I never really got rid of it (still in family).

Matt M

It looks like the tubepower has a lot more personal experience with Aric’s products but if you’re not picky about esthetics like fancy case or heavy aluminum faceplate, machined knobs, etc., I think you will be happy with Aric Audio preamp. The inside is a bit ugly but its sort of the nature of the beast with handmade point to point wiring. The positive side is it makes it possible to easily replace parts either for repair or upgrade. Don Sachs preamps also get great reviews but I understand the waiting time could be long. I also seriously considered the Mapletree Audio preamp mainly for its separate power supply unit. Quicksilver also has a preamp for under $1K.

By the way, my comparison with the LS26 was after I had rolled all new/NOS tubes and upgraded to top of the line Audyn capacitors. Some may still like the LS26 better for its more natural balance sound across the frequency range. I had tried a Conrad Johnson PV10 in my system - what started me on this path, a while back and it sounded nice and juicy but the high end was not sparkly and just felt a little too dull. It seemed like the frequency range was squeezed at both ends and had bulged in the middle, if that makes sense. With the ARC it was like the frequency response was ironed flat. The modded Unlimited just seems to have the best qualities of the two extremes with more sparkle on top. I should add that my system is fairly modest so I may be hitting the limits of what my system is capable of. Better amp and speakers may still pull more sound out of the preamp.

There are lots of options out there and you need to decide how much "tubey" sound you like and pick the gear accordingly. I think a more tubey preamp would be a better match with your Parasound.


@markainsworth  I was working with Aric on an amplifier build. This was after receiving strong recommendations from @kdude66 and @teajay  
but I decided to hold off on it until I further solidify my digital front end and get the new speakers in system and settled.

If you can stretch your budget and get the upgraded parts you and Aric agree upon, that's what I would recommend. The preamp is a critical component (I recently learned this valuable lesson myself) and once you get a good one in system, you will realize that upping the quality reaps tremendous returns. Even if you stay to budget, the base build will go a long ways. Great thing about working with a builder like Aric is that you can have him perform the upgrades later. FYI: his current times to build are super short relative to some others out there and he doesn't over sell the upgrades; if anything he's likely to hold you back should you get crazy. : )

As for the 6SN7 linestage vs the Unlimited, Aric will be able to guide you on the differences and best fit for your needs and system. 

All the best.
One additional thought, given the infectious spiral of our hobby....it may be wise to look past your system...so you are better 'proofed' for the future.
Hi Mark take a serious look at Radu Tarta's DHT 4p1L tube preamp. I have owned one in the past and hope to get a custom one soon. Radu is a very talented builder and uses Lundahl transformers for power, choke and output. The link shows his most recent build with a $400.00 remote control. If you don't need a remote he will likely build one for you without it at a reduced cost.

https://simplepleasuretubeamps.wordpress.com/products/