MBL: single 9008A to drive 101e - bad idea?

I have the MBL 101Ds and a pair of 9008A amps along with the 6010D pre-amp. My speakers are very similar to those you are contemplating buying so hopefully my experience will translate. If I were you I would buy the 101Es. You REALLY need the mid/low Radialstrahler driver, its a huge step up from the models further down the range. However to drive that guy you also REALLY need the 9008A. I've used Spectral and Spectron amps previously with these speakers and the MBLs are a huge upgrade. I've read that the 9008A amps were designed specifically to drive this speaker. If funds are tight then buy a single 9008A. The sound may not be optimal but it will still be fantastic. Feel free to contact me directly if you want to discuss

Most of european components have different hot pin on xlr-s

Teddy_bear do you know if this would also be true for say with my ACCUSTIC ARTS HYBRID TUBE DAC which is made in Germany?

I use the AES "XLR" digital connection from transport to dac and balanced "XLR" outs from the dac to my balanced "XLR" in's on my ARC REF3 pre.

Is there an easy way to find this out with out contacting the manufacturer.

The product distination was to be used in the USA and Canada.

Thanks everyone for the advice! =)
I'm currently using B&W 803D's with Pass Labs X250.5. It is my goal to eventually build up an all MBL system (perhaps within a year or two I'll add the other 9008A and the 6010D pre...)

Dev: When you said you didn't like the 9008A's paired up with your 101E's did you mean that you didn't like it when used in stereo mode, or just didn't like the 9008A's with your 101E's (in mono mode) to begin with?

Hi Clickster2, I demoed a pair of broken-in 9008's in my home and did not prefer them. That being said there could be reasons for this, firstly I did not have a MBL pre-amp set-up with them but instead my ARC Ref3. When I was listening I preferred the sound when I pushed the "INVERT" button on my remote to change the phase for the AR pre. I have been told since by another person that product from Germany (using XLR connections) are wired differently then say US made product such as the AR Ref3 pre. which I had hooked-up in balanced mode.

So this would have a major role in the sound so I would think. Also I was using cables of what I had (Stealth, Indra Ic's, Dream PC's and SC's and Sextet AES digital) and did not do any cable changes so all that being said I'm not totally convinced now of my findings. Other MBL users recommend not use silver with the speakers and all use different cables than I do.

I will say other amps I had on hand I used the same with and never had any issues what so ever. I believe the biggest issue here would be the phase issue and if this is true, I have not done any research to find out due to just actually learning about this. If this is true with the amps then the same would go with the pre and all other gear that everyone out there is using and mix and matching with non German made electronics.

Hope this helps, I also had Pass X600.5's with them with no issues what so ever, Cat JL3 Sig. MK2 mono blocks also with no issues and preferred both over the MBL's.

In closing the MBL's are my favourite speakers period and anything you put with them will sound great. If I was you I would look at other alternatives for amps and save large, Spectron mono blocks, Nuforce and others. Do some home work as others are using them and did comparisons already but still listen for your self.