Mint Protractor. A Pretty Nice Alignment Tool


So when I bought my Triplanar the seller had a Mint protractor for it. It was cut to be used on a Garrard 401. As luck would have it, the spindle size is the same as the one on my Scheu Analog table. So I put it on the table this morning, and fine tuned the cartridge alignment. My overhang was off just the smidgiest of a smidge, and I made the slightest of corrections to the cantilever alignment. Using an overhead light it was very easy to see the alignment lines. Playback showed the efforts yielded positive results. I have to say this is a good product. Nothing magical about it, just a clean execution of an arc protractor.

neonknight

@chayro At the Mint site there is no longer an email link, the one there takes you to an order page is all. Also the order and associated shipping schedule stops at February of 2022. I find no threads of where anyone has purchased one past 2022. All indications are something has happened with Mint, and they may no longer be obtainable. Hope I am wrong, but it seems that way.  

There is something to be said for using the alignment algorithm (Stevenson, Lofgren, etc) for which your tonearm was designed. Because deviating from one to another requires twisting the cartridge in its headshell which can create aberrant force on the cantilever. 

Dear @neonknight : " The Mint protractor is built specifically for this arm. "

 

NO, that’s where you misunderstood strated and belongs because the MINT LP protractors were made not for an specific tonearm ( this does not matters. ) but for an specific P2S distance.

 

Look, the name in cartridge/tonearm alignment is accuracy and the MINT LP protractor is totally accurated for that specific P2S distance that each owner ask for.

Example of that accuracy and your misunderstood, differences in the alignment A and B in Lófgren are this way:

same linear offset for both A/B, different null points at each one, same offset angles, different tracking distortion and error levels and different overhang by only 0.8 mm and obviously different P2S distances.

Compared any of the A/B Löfgren alignments with Stevenson all parameters are way different ( this is the worst kind of alignment but one choosed by tonearm japanese designers. )

R.

I ordered two Mints from Yip way back in the day when I was using VPI decks. As Raul has noted, P-S was a critical measurement for Yip. He would not provide his custom protractor without it. He also needed to know the ID of the tonearm.

Now that said, is the Mint "pretty nice"? Well dayum, "pretty nice" describes a lot of things, even the mediocre. The Mint is very difficult for those with so-so vision or who have brains that for whatever neurological reason do not perceive paralax very well. And all for an alignment method that favors classical music with crescendos at the innermost grooves.

I’ve said this so many times that I am embarrassed to say it again. One can literally slam the cartridge to the very front of the head shell and if you nail the tracking force, VTA, and zenith you will get very good sound. With microline and similar stylii there is a fair bit to be gained by further optimization. The point of this is that minimizing arc-induced distortion is so incredibly overrated-it is like how you choose to set your broken watch so that at least it’s right two times a day.

@rauliruegas is absolutely correct. Most tonearms are not at their specified spindle to pivot distance. They are off by several mm which throws the Mint out the window. There are way too many ways to create error when drilling for the tonearm. SME took this into account when they created their famous tonearm base.

In order for a protractor to be as accurate as possible the lines have to be vanishingly thin and there has to be a little divot to place the stylus in. The SmarTractor is a great example. It also gives you a choice of alignments, Lofgren B being the best for modern records.  The SmarTractor also allows you to accurately measure the spindle to pivot distance. So, if there is room for adjustment you can get it right on target.