@milpai ....have you taken your journey to Chitown to do some auditioning? Curious as to what you discover. The Spendor D7 and Proac d30r seem like great speakers! Keep us posted. Regards......
Need feedback on loudspeakers
Hello All,
I have been researching a lot about loudspeakers lately - their measurements including sensitivity, impedance, phase, etc to make sure that they match in my system. Also had a chance to listen to a couple, but yet undecided, since I am not able to listen to all of the ones I have shortlisted below. I have a very short list of criteria for the speakers:
Sensitivity more than 88db
Nominal impedance 8 ohms and minimum not dipping below 3.5 ohms
Go down to about 27-30Hz
Price range is about $7k new/used
The loudspeakers that I have short listed are:
Spendor D7
PSB Imagine T3
ProAc D30
PMC Twenty 24
Tannoy Definition DC10T
Revel F208
Focal 1038 (used)
Could also consider the following, but not sure if they would match in my system because of their nominal 4 ohms impedance:
Sonus Faber Olympica III (used)
ProAc D40R (used)
Audio Physic Scorpio 25 (used)
PMC Twenty 26 (used, but has low sensitivity)
I love speakers that have the sound image starting about 2-3 feet behind the speaker front face, throw a wide image and disappear completely. That is what my current speakers do. My room is 15 X 18 X 8 and the speakers are placed very precisely (5feet from back wall and 3 feet from side walls) to achieve this imaging. I have a few panels to tame the sound in the room. My amp is Parasound A21 and I have an excellent Promitheus TVC. Current sources are able to effectively drive the amp and the speakers, without any issues.
I have listened to PSB Imagine T3 and Audio Physic Classic 20, and found that they image per my liking.
I know I have listed too many speakers. But would love to hear from owners of these brands on the "vocal characteristic" of the loudspeakers, now that I have provided a brief explanation of my preferences. There is no denying that the best way to seek a set of speakers is to audition in person. But sometimes this is not possible. Please provide your feedback, as much as you can. Thank You in advance!
I have been researching a lot about loudspeakers lately - their measurements including sensitivity, impedance, phase, etc to make sure that they match in my system. Also had a chance to listen to a couple, but yet undecided, since I am not able to listen to all of the ones I have shortlisted below. I have a very short list of criteria for the speakers:
Sensitivity more than 88db
Nominal impedance 8 ohms and minimum not dipping below 3.5 ohms
Go down to about 27-30Hz
Price range is about $7k new/used
The loudspeakers that I have short listed are:
Spendor D7
PSB Imagine T3
ProAc D30
PMC Twenty 24
Tannoy Definition DC10T
Revel F208
Focal 1038 (used)
Could also consider the following, but not sure if they would match in my system because of their nominal 4 ohms impedance:
Sonus Faber Olympica III (used)
ProAc D40R (used)
Audio Physic Scorpio 25 (used)
PMC Twenty 26 (used, but has low sensitivity)
I love speakers that have the sound image starting about 2-3 feet behind the speaker front face, throw a wide image and disappear completely. That is what my current speakers do. My room is 15 X 18 X 8 and the speakers are placed very precisely (5feet from back wall and 3 feet from side walls) to achieve this imaging. I have a few panels to tame the sound in the room. My amp is Parasound A21 and I have an excellent Promitheus TVC. Current sources are able to effectively drive the amp and the speakers, without any issues.
I have listened to PSB Imagine T3 and Audio Physic Classic 20, and found that they image per my liking.
I know I have listed too many speakers. But would love to hear from owners of these brands on the "vocal characteristic" of the loudspeakers, now that I have provided a brief explanation of my preferences. There is no denying that the best way to seek a set of speakers is to audition in person. But sometimes this is not possible. Please provide your feedback, as much as you can. Thank You in advance!
- ...
- 70 posts total
For $7K, you may be able to get into a set of the new Legacy Audio Signature HD, which uses "the same Dual Air Motion Tweeter System and 7" midrange as the Focus SE".
If you are going to Illinois, you might want to visit them in Springfield. http://legacyaudio.com/products/view/signature-se/ I have a set of the old Signature IIs from the 1990's, and it is difficult for me to go into an audio store and listen to any current speakers in that price range from Dynaudio/Sonus Faber/Focal/PSB/Revel etc., and feel like I would be upgrading very much. Last Friday, I was able to audition a set of Dynaudio 3.4 at an audio shop in Austin, and they had a better defined mid range, as they should because the Signatures have old poly woofers, but had nowhere near the bass extension of the Legacy Signature IIs. We then hooked up a set of the Sonus Faber Olympica 1, and they were ok, but I think I may prefer the Dynaudio "house sound". |
@carmenc, I have not been to Chicago recently. But if I do, then I will update this thread to update my experience. @mtrot , I did listen to some Legacy loudspeakers during the AXPONA 2015. I believe they sounded pretty nice. I will stop by again if I visit Chicago area and listen to them at a dealer. Thanks for the recommendation. |
@kalali, Why do you think the price of a component would ALWAYS determine it's performance? It sometimes does but not always. My $1.6k preamp spanks a $4.5k preamp. And this was a personal experience in my own system. I also heard the B&W 804D3s, which is more expensive than the T3s. I would take the T3s any day over the B&Ws. |
- 70 posts total