New Esoteric P02 D02

Hi, My name is Rob and I recently purchased a P2/D2 combo and was wondering what settings you find to be the best as far as sampling and filtering. One thing I am a little confused on is the clock setting. Right now the dac is set to WORD OUT. Does this setting achieve the 22.5 mhz signal they are talking about because I can't get any other clock setting to work or link up. I have heard some harshness with the 24/384 upsampling setting. I am now listening to the 48/176 and it seems to be better. I am using the SLY1 filter as well. What are your thoughts ?

If you have only the 2 box setup, setting the DAC, be it P03/D03 or P02/D02 is the way to go....this will cause the transport to sync using the clock in the DAC. I cannot speak for the P02/D02 but I find that 24/176 is the best clock setting on my P03U/D03.

22,5 for clock is what is typically recommended by Esoteric. That is what I use, although I have not tried any other to say the truth.

Regarding up sampling I do use 48/176 and happy with this setting. I leave all filters off otherwise. To me it sounds very well this way. Again have not done extensive listening with any other settings. Only esporadic. Maybe some day. For now I am happy this way.

If I have P-02/D-02 with G-0Rb, how I should connect them, as G-0Rb supports max 176.4kHz only.

1) G-0Rb (176.4kHz) --> P-02
+ G-0Rb (176.4kHz) --> D-02

2) G-0Rb (176.4kHz) --> D-02 (22.579MHzHz) --> P-02

Given all other factors equal, and I totally prefer highest resolution sound, is (1) or (2) recommended from the technical/engineering point of view?

I am aware that general connection is (1), BUT

- in page 6 of D-02 owner's manual http://www.teac.co.jp/audio/manual_esoteric.html

- in page 42 of this powerpoint http://esoteric.teac.com/download/P-02/Downloads/P-02:D-02_Power_Point.ppt

they indicate using connection (2)

Any thought from technical/engineering point of view?

Thanks.

Hi Opera Lover. Haven't read the documents you attach. I will.

But I had in my house the P02/D02 with the old G-0Rb for a trial and the sound was fantastic. Great improvement. I did use 1). Both units connected to the clock. I would imagine that is the best way of doing it by far. Did not even imagine connecting it the 2) way so can not comment but the whole point of it is the accuracy of the clock signal, I think.

Anyway try it. I think the advantage should be evident of 1) over 2) but let us know. As I said here, when I deciding to buy the new G-0 I tried first the 02s with the old model. The gain was great. It improved with the new clock even farther.

But the gain was greater from going with no clock to the G-0rb, than that of going from the old model to the new model. So enjoy.