2. speakers
  3. 133293-107338

New system has fatiguing, harsh high frequency sounds. How to fix?

I just purchased my first audio and home theater system (other than a bluetooth speaker or computer speaker system). I use it for listening to music as well as watching movies. It is a tremendous upgrade and I’m enjoying it. It has clarity and detail that I have never heard before. However, I notice a harshness in the high frequency sounds when listening to music.

I would like my treble to be smooth, sweet, soft, silky and gentle. Right now it is the opposite of that. It is annoying, screechy, metallic and harsh.

I am seeking a solution to that issue. From the little I have been able to find on this subject, it seems that room acoustics might be a big part of my solution. Is that true? If not, what is my next step? An equalizer? I can’t see many options for big changes in speaker placement. At most I can move them a few inches or change the angles.

My listening room is about 11.5 feet by 11.5 feet and square except for the doorway in the back corner which protrudes into the room 18 inches x 44 inches. In the room are a bookcase, couch, end table, media center stand (holding TV, center speaker, receiver, disc player and Roku), computer & computer monitor, my speakers (and rear speaker stands), a ceiling fan and that’s about it... I’m describing the room on the assumption that the room (or its contents) are relevant to the treble problem I’m describing. (However, throwing some thick blankets over my TV and computer monitor, as a test, did not change the issue.)

Here are my home theater components:

  • Computer monitor: WASABI MANGO UHD400 40" 3840X2160
  • TV: LG OLED65C7P 65"
  • Receiver: Sony STRDN1080
  • Disc Player: LG UP875 4K BLU-RAY PLAYER BestBuy SKU 5979504
  • Streaming Box: Roku Ultra streaming player (model 4660)
I mention the monitors (and their size) in case they play a role in reflecting sounds.

Speakers:
  • Front 1: Polk Audio RTi A7 floorstanding speakers
  • Front 2: Polk Audio RTi A5 floorstanding speakers
  • Center Speaker: Klipsch RP-250C Center Channel Speaker
  • Subwoofer 1: Polk Audio PSW125 Subwoofer
  • Subwoofer 2: Klipsch R-112SW Subwoofer 
  • Rear/Surround: Polk Audio RTI A3
Speaker Layout: 5.1 layout with two pair of front speakers and two subwoofers.

The front speakers are on either side of the LG TV on the front wall (and near the room corners. The front speakers are angled in. Minimum distance to wall is 10", but measuring straight/parallel from back of speaker to wall is at least 18". From side of speaker to wall is at least a foot (one side of room has 30 inches). There is only 3" between each RTi A5 and RTi A7 speaker.

The rear speakers are behind the couch at each corner and against the back wall.

One subwoofer is in the back corner. The other is midway on the other wall and angled toward listening area.

For music, I usually prefer listening in 2-channel stereo. The dual pairs of front speakers are awesome. (I initially started out with a 7.1 layout but I prefer this layout now.) The high frequency problem exists even in 2-channel stereo. It also exists if I use only 1 pair of front speakers.

Wiring
All speakers are bi-wired, except the center (and subwoofers), which don’t support it. (Not bi-amp’d, just bi-wired*.)

Speaker wire: Mediabridge 12AWG 4-Conductor Speaker Wire (100 Feet, White) - 99.9% Oxygen Free Copper - ETL Listed & CL2 Rated for In-Wall Use

* https://www.qacoustics.co.uk/blog/2016/06/08/bi-wiring-speakers-exploration-benefits/

Banana Plugs:
  • Mediabridge Banana Plugs - Corrosion-Resistant 24K Gold-Plated Connectors - 12 Pair/24 Banana Plugs (Part# SPC-BP2-12 )
  • Sewell Silverback , 24k Gold Dual Screw Lock Speaker Connector
  • Ocelot Banana Plugs, 24k Gold Plated Connectors, Open Screw Type
BTW, my prior speakers were the Edifier e25 Luna Eclipse. I thought they sounded good and I did not remember them having these harsh high frequency sounds. After listening to my new system for a week, I went back to those for a test and they sounded horrible in comparison. The harsh high frequency sounds are much worse, and every other aspect is worse as well. (That shouldn’t be a surprise given the price ranges being compared, but my incorrect memory had been that they didn’t have this issue.)
lowoverdrive
bar81
791 posts
 
@willemj It really depends upon what we’re talking about. Most of the low to mid audiophile digital isn’t harsh because it’s artificially smooth and lacking in detail retrieval and dynamics. In that regard, you are absolutely correct in that most audiophile digital these days is not harsh, but it is lacking in many other ways. If that same digital actually revealed the detail that’s there in a proper system that is capable of revealing such detail, they would certainly be quite harsh almost across the board. But this is all besides the point here; in this case we’re talking about a blu ray player and a receiver - that’s quite low end and is going to be harsh in almost any system (it certainly also doesn’t help that the OP is using four speakers for two channel - that can’t help, not to mention that such speakers are low end to boot).
geoffkait's avatar
geoffkait
23,365 posts
 
I suspect people get used to certain types of distortion, including high frequency harshness. Distortion is a very relative thing. You often don’t realize exactly how much distortion there is in the sound until you eliminate some or most of it. Almost all system I’ve ever heard, including those at shows, exhibit gross distortion when the volume is greader than average volume. It’s as if the system just can’t maintain its composure at higher volumes and blows its cool. A great many causes of distortion, especially in the high frequencies, have been identified. But not all of them.
pcrhkr's avatar
pcrhkr
276 posts
 
1. Another person mentioned a break in period for the speakers.
Correct! Very, very, important. Pound them with bass within reason to loosen the woofers. Just play it all day at low volume all day for the tweets and mid for a week
And I bet they will start settling down. The Klipsch will especially be harsh at first because of their high efficieny.
2. You mentioned room acoustics. This is also correct. After speaker break in, if not good then I would change the room with absorbsion material to deaden the ’biting" frequency. A decorative quilt or something on a back wall might be enough so experiment. The highs will hit the quilt and not reflect as much.
3. An equalizer will also work to locate the hot frequency. The EQ is just another piece of equipment in the audio path so do not let it be the weak Link in your system. Make sure the signal to noise ratio and dynamic range can complement your system.
4. Some people in the blog mention distorion is expected in a lower end system. Somewhat correct? You can have a system like yours in an acoustically good room outperform a very hi-end system in a bad acoustic room. You have a nice system for the room size and it will not take much power to have great sound under the correct acoustical condition.EQ alone may not totally fix the problem  but could make a huge diffetence. An EQ worked for me. Rooms highs were absorbed

willemj
1,036 posts
 
I am not denying that his system sounds harsh, only that this is not because he uses a digital source. Earlier in this thread I have given a checklist of possibilities.
By the way, there is nothing wrong with Bluray players as disc spinners (think Oppo). In this case the BD player was even used with an external DAC, so the sonic signature would be that of the DAC. Anyway, the harshness in that small room system has already been cured.
As for harshness at higher levels, and it is indeed real, ceteris paribus the root cause of that is insufficient amplifier power. I fail to understand why self professed audiophiles do not understand that moving a lot of air simply requires a lot of energy. Fortunately for him the OP has solved that potential problem with his 2x500 watt rms amplifier.
willemj
1,036 posts
 
As for break in, not surprisingly as mechanical devices speakers need a bit of that. Harbeth say a few hours will do, and that was indeed my experience, even if the difference was never more than minor.
More to discover