- ...
- 806 posts total
Mr. shadowcat2016 For your setup, a 2x0 AWG is recommanded. A 10 AWG has 10 times the resistance of a 0 AWG. The Bi-wire is a mistaken concept. A single wire that has the added thickness of the two of Bi-wire, would do better. If you would run this simulation on "Spice" you would see that. For the wire you have and the wire you need, it is x20 times worst. Whay do you say: "I’ll play, why not, I might learn something useful". This service (doing the calculation for you) is given for free. At least for now... :-) |
Mr. stevecham
For example, if you would connect a cable, that has a 0.005 Ohms (one red and one black) that have a combined value of the same 0.010 Ohm, your DF would drop due to those cables from 500 to 250. That's like paying for that amp $37,000 but enjoy only 1/2 of that. Most, use long an thin cables that would reflect a resistance that would limit the amps DF by 80% or more. This is paying $37,000 but using only $7,400 of its potential. The rest, $29,600 will wait for a better time when a better cable will come…if it will ever come.
|
Mr. han_n
I found it here: https://positive-feedback.com/reviews/hardware-reviews/ch-precision-m1-mono-amplifier/ The Gryphon Pendragon speakers are $195,000.- : http://www.milliondollarstereos.com/speakerlist.php?category=speakers&pagenum=4 I hope you have the time to enjoy it. Must be a fantastic sound. |
- 806 posts total