NOS Western Electric wire used for power cables??

Fuzzbutt17

I won't tell you who sells magnet based AC filters and grounding devices out of respect for the owner of the company who is a friend of mine.

Then you should never have made any mention of it at all.

He doesn't engage in forums and he warned me about the same.

Apparently he told me that there are some people on forums that seem to know nearly everything about everything and make it their mission in life to explain away anything they don't understand whether or not they've personally tested it or not.

It's been my experience that it's usually the quacks and charlatans who avoid the daylight. If the claims are legitimate, they won't be able to be explained away. If they can, then the claims being made clearly aren't fully fleshed out.

I don't know WHY many things work.

First you have to define what you mean by "work."

Do you mean "work" as in it produces an actual audible difference or improvement? Or do you mean "work" as in someone simply subjectively perceived some difference?

If the former, then you have to first determine that the thing you're talking about actually does "work." Otherwise you'll never get to the WHY part.

If the latter, then there's simply no point in even wondering WHY, as it could be any number of things including purely psychological reasons.

I do know that when I do my R&D testing I am as objective as possible and try to make IDENTICAL components with only ONE difference between them.

As long as you're just relying on your subjective experience, then you're not being objective in any meaningful sense of the word.

Once I come up with what I consider to be an improvement I then send it to my blind testers for comparison (they are "blind" not "deaf").

If you're sending it to your testers and they're comparing it to an old version, then they're not blind at all.

Lucky for me I have beta testers with minds and ears of their own to straighten me out when I THINK I know what I'm doing but obviously don't.

All you're effectively doing is marketing research, not establishing whether or not there's actually anything going on.

Tired of dancing. Let me END on this little bit to satisfy all the other readers (since it is obvious I could never satisfy you).

"Work" for me means that I hear better time, tune, and musical flow. This seems to be usually be accompanied with higher resolution, better layers, better spacial cues, etc.

Quite often the wire or component that I want to "work" is not the one that does. A perfect example of this would be Furutech connectors. I love the way they are built. The name is well known and respected.

The ONLY problem is that our "subjective" listening tests showed that the pure copper plug sets I'm now using that cost roughly 1/3 as much as the FI-11Cu sound (work) considerably better (as defined above).

All of us wanted the Furutech to win. I sent people 3 identical power cords made from wire that came from the same spool. One with basic brass Wattgate (my original standard), one with Furutech FI-11Cu (Furutech's most popular plugs), and one with a humble Chinese made pure "red copper" plug set.

100% of the beta testers preferred the humble Chinese pure copper plugs. Not some. Not most. All.

Another statistical FACT. In the past 12 months I got only 3 power cords returned on my 30-day guaranty for refund. All three had the same Furutech plug sets.

A similar test was done with the 8AWG wire. Granted, this wire didn't come off of the same spool as the other wires it was compared to. On the other hand, I continually go through spools with slightly different vintages so I have that statistical factor.

Originally I would send people a 14AWG and a 10AWG cord to let them both decide if they liked my power cords over their current reference and to decide which of the two they wanted on which of their gear. At that time I "hypothesized" That some pre amps may sound better with one vs. the other and that all low current draw components would sound better with 10AWG.

I found that when a person purchased a 14AWG by itself they kept it but when a person compared a 14AWG to a 10AWG they would either return the 14AWG in exchange for a 10AWG or order only more 10AWG.

A similar thing happened with the 8AWG. One of my customers (against my advice) ordered a pair of 8AWG for their amps. One of my distributors did the same thing. I thought they were "over-compensating" but as they say, "the customer is always right."

Soon that same distributor ordered more and more of the 8AWG cords and told me he preferred them in his entire demo system. He only sold the 10AWG to customers on a budget.

At this point I did a similar test with 10AWG vs. 8AWG for myself...this guy was right...they do sound more open, detailed, and effortless than the 10AWG even on a CD player or phono stage.

I then did a beta test and 100% of the testers had the same results...the 8AWG was preferred.

People didn't WANT to spend more for the 8AWG. The 8AWG is HUGE and less flexible. The whole thing makes no sense.

Another statistic: since I switched to the pure copper plug sets I haven't got ONE power cord returned for refund (and I've sold 10X as many cords or more).

Another statistic: when I now send customers a 10AWG and an 8AWG to compare I only get the 10AWG returned for exchange.

Another statistic: since I've been recommending my 8AWG Cross-Helix as my best sounding power cord for ANY situation I have had DOZENS of high end customers with $30K+ systems and about a dozen with $100K+ systems that ALL replaced their "whose who" $2K5+ power cords with Stereophile class A ratings and full page adds in magazines with my humble 8AWG.

Another definition of "work" is my level of customer satisfaction. My sales have gone up 4X what they were around Xmas. My returns for refund or replacement have been ZERO since I started recommending the 8AWG as #1 and took the 14AWG from my recommended products list.

I started this business as a HOBBY and had NO IDEA I would do 10% as many sales as I have. I simply know what sound I preferred and made products that pleased my "subjective" testing.

Apparently there are a good number of audiophiles that agree with my "subjective" testing and my criteria that time, tune, musical flow, and organic timbers are most important and other "audiophile" attributes such as "extension, image, depth, and dynamics" are less important.

One last thing...

What is it that YOU do?

How much have YOU sold of original products internationally?

What is the rate of growth of YOUR sales?

As for my friend that arguably makes the finest AC power conditioners and grounding systems in the world. You remember...the one you say is "hiding in the shadows."

Everyone told him a $35K power conditioner was a STUPID idea and would never sell. Everyone told him a $12K grounding system was STUPID and would never sell.

FYI: a $100K system uses more than one of each of these for use in a large building that holds a recording studio.

Lucky he didn't listen to EVERYONE. He now has distributors all over the planet and is quite popular with the "over $250K system" crowd. He has offers by many of the "whose who" to put his power conditioners in their rooms at CES, Rocky Mountain, and other well known audiophile trade shows.

Is he hiding in the shadows?

NO.

He has just learned that it is a WASTE OF TIME to debate things on a forum with a know-it-all like you. He no longer justifies your claims with an answer because he rolls with the "whose who" crowd and has NOTHING to prove.

As for me, I'll leave you with TWO thoughts:

There is a distinctive difference between a person with 30 years experience and one year's experience repeated 30X.

Also...

The difference between knowledge and wisdom is knowledge is TAUGHT and wisdom is EARNED through EXPERIENCE.

I continue to TEST new "theories" and then to confirm my findings with my beta testers and my customer base.

What new ideas or concepts have YOU tested recently?

I wish I could say this has been a pleasure, but it's been more like giving my cat a flea bath.

I'll be interested in seeing your answers to my questions (if you dare) but I won't be responding again.

I only continued with this thread for the benefit of OTHERS and not you.

From now on, I hope to take my more experienced friend's advice and stay off forums.

All the best to everyone.

Please feel free to contact me directly if you have any questions or comments about my products.

Much of what I know I learned from my customers.

Benjamin

Simply_q, here you go: http://www.tripointaudio.us/PRODUCTS.htm

Audion member Himiguel is the manufacturer. I've had several conversations with him prior to him starting his business so I was pretty aware of his grounding technology and when Ben in his last post mentioned the grounding system it finally clicked.

Also, here is comment on Ben's eBay ad referencing the manufacturer:

miguel10744 is a manufacturer of high end audiophile power conditioners. He compared my power cords to ones that cost SEVERAL THOUSAND $$$ and mine won. He recently purchased my interconnects and digital cable (from my website): they are now his REFERENCE.
Positive feedback rating:
Cable as described. Great transaction, Highly Recommended. A+

Ben, why hide the manufacturers information? I've never known Miguel to shy away from a conversation about his technology and products.

Maybe this is why he doesn't like participating in forums anymore:

Thank you for the kind words, Roger. I'm so glad my advise has improved the sound of your system. As you know Holy $hit Inky Blackness can be a highly priced commodity :) But it need not be with a little bit of applied knowledge.

For those interested in what the heck we are talking about, take a look at this thread that Mr. Wavetrader started:

http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1234813956
Danmyers

The specific link in question on that thread can be found here:

http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1234813956&openflup&28&4#28

I've know a number of people who have implemented this grounding scheme with great results and at a significantly less cost than Tripoint charges for their technology.

I use a Xentec .001pf isolation transformer modified with my power cord, Maestro audiophile plugs, and anti-resonance treatment.

I have GREAT results and have heard no better in my own home.

I don't use what I use because it's "the best" but only because it's the best I can afford.

I only listen to people's opinions on such things that have used the two products side-by-side over extended periods of time in the same system.

Better yet, done that on multiple systems.

"Great results" is as subjective as you can get. Did ANY of these people compare their "reference" to a Topaz or Xentec .005 or .0001 isolation TX let alone to some of the other more expensive alternatives?

My guess is "NO" so why should I accept their opinion?

On the other hand, I do know of SEVERAL people that have made similar comparisons. People with electronics engineering and other technical degrees that make their primary living working in electronics, recording, or laboratories.

Some of these people (that could afford anything) purchased the Tripoint solution and some purchased laboratory grade iso TXs.

Personally I've compared the Xentec and Topaz .005 to some pretty impressive "hospital grade" iso TXs as well as some pretty expensive and well known audiophile products.

None of them hold a candle to my Xentec let alone to the better 5KVA .0001pf version.

Then again, Xentec and Topaz iso TXs have a VERIFIED rating of something like -136db of noise reduction and are used in laboratories and high end aerospace applications.

That's not a "subjective" review by an audiophile. That's a verifiable technical FACT.

The Tripoint products offer SIGNIFICANT advantages over my Xentec iso TX. The ONLY reason I don't own one is that I can't afford one (yet).

I noticed that you didn't answer my questions.

Who's hiding in the shadows now?

Clio09

Simply_q, here you go: http://www.tripointaudio.us/PRODUCTS.htm

Thanks, Clio.

Went to the website but found absolutely no useful information. Just a lot of buzzwords and hype.

He refers to the magnetic modules as patented, but I wasn't able to find any patents issued to a Miguel Alvarez for such a thing. Nor any patent applications for that matter.

I do note that his last job before starting Tripoint was as a marketing representative for Bose. ;)

Anyway, not much to be said for something that nothing informative has been said about.