Passive crossover power usage

The last thread about crossovers (good and bad or as is and rebuilt with better components) got me thinking about the power required in watts to run it. Actually heat dissipated by the crossover itself.  Seems to me it must be minimal if some of you guys a running systems with crossovers and are using 2-5 watt flea power amps on efficient speakers.  Any ideas?  Thanks.


Oops: should read "to match the output of a lower-sensitivity driver", not a higher-sensitivity one.


I'm sorry you feel as though I wasted your time.  No, I didn't know the answer at all.

Earlier that same day I was at a buddies house and we were discussing the possibility of me purchasing different speakers.  The reason being I'll be seventy soon and would like to simplify my system. No one in my family wants it or even has the space for it.  A common problem I understand.  

My buddy is of the opinion that anything I do would not be satisfactory compared to what I have now (which I'm very satisfied with).  He then went on a tirade about crossovers and how much power they suck up.  Asked me why would I want to go back to that.

So, I was simply asking the forum if anyone knew, that is all.



@erik_squires  pretty much covered it. The other parts that can dissipate power are inductors, particularly those wound with very thin wire like you often see in less expensive (and some pricier) speakers. 


I agree with your point concerning "less processing is better".  The reason I went with an electronic crossover is the control I get from the ability to alter the input level to each set of speakers in the box.

I would say the biggest benefit of that is the mids and highs have no idea what the woofer is doing and they don't care.  So, everybody plays nice. 

You're right to each their own.




IMHO, the best, simplifying solution right now for active speaker making is to use a plate amp with built in DSP. These are available from Madisound, Parts Express and miniDSP.

They come with 2 or 3 output channels. The benefits are mulitple, including not having to have 3 amps and an explosion of cables coming in and out of them, but also better frequency response tailoring than you get in an analog crossover.

I am currently working on a 3-way center channel and the features of a Hypex 3-way amp/crossover is really outstanding.