Performer-in-Room Quality with Speakers?

OGOgre,
i’ve found what you are looking for with only 1st-order x-over time-coherent speakers no matter what the type of driver. Some examples of such types of speakers are (these I’ve personally heard/owned): Green Mountain Audio (cone drivers), SoundLab (electrostatic), Sanders Sound Systems (ESL again).
From the list of speakers that are 1st-order x-over & time-coherent that I have not listened to: Vandersteen, Eminent Technology, some older Quads & there were a couple of older Martin-Logans.
There are some other brands than either member Nonoise or Onhwy61 shared with the group in the "Is DEQX a game changer?" thread but I cannot recall them right now.
Some A’gon members have found what you’re looking for by investing in a hardware-software package called DEQX (you have to buy their hardware & install their software on your computer, let their software measure your room & let it build a frequency correction profile such that your speaker becomes time-coherent, it does real-time processing to make your speaker time-coherent as you playback the program material). My understanding (from the "Is DEQX a game changer?" thread) is that, when done correctly, the results are superior & all those members who partook in DEQX are shaking their resp. heads as to how much better their sonics have become with DEQX activated.

Thanks to those who've so far responded.  I've had a feeling that the magic formula might involve time-coherence and / or apart-from-the-usual crossovers.  Regarding the former, I've thought about rebuilt Dahlquist DQ-10s.  For the latter I've considered Vandersteens.  I've thought about electrostatic, but WAF, cost, and placement sensitivity make me reluctant.

For amps I have a medium-powered push-pull integrated and a high-power power amp with a homebrew tube pre.  But I am open to SE, triode or pentode.  I will probably have a Revox open-reel in my near future, and I will soon need a new CD system.  I have an old Dual and a Yamaha PX-3 for platter-spinning, but vinyl has increasingly become a WAF issue. (Snap, crackle, and pop + cleaning and wear and tear = disapproving looks.)

I've considered horns, but every horn system I've ever listened to quickly gave me ear fatigue.

I also have considered doing a DIY with a single "full range" driver with no crossover at all, and / or a small-scale baffle-less arrangement.  I've heard from a friend that going with very small high compliance drivers in an extremely narrow baffle tower might produce much of what I'm looking for.

The Maggies I had (MG-IIBs), were great.  Actually, I have still  have them in storage, but we moved to a house that was bigger but has smaller rooms, plus, while the soundstage was huge and the sound ethereal, they did not sound like the musicians were actually in the room, unless that room were a concert hall.

My Shahinians do a similar thing but in a smaller space and with very deep bass, but again, I do not actually feel like Chet Baker is seven feet from me in the room.

My DCMs are quite rare, with only a few ever made, the two-piece Time Window Cubed (or Time Window with a third power superscript).  Those were time aligned and also went down to an F3 of about 15hz when I drove them with two Thresholds.  They really shined with 30 - 50 amperes. 

But those days of volume and bass and a big listening room are gone.  Now I'm looking for a smaller, simpler arrangement that could make a singer sound like there is no recording, not even a microphone and P.A. involved, just Tracy Chapman on a stool singing in the living room.

OGOgre

Ohm and mbl but not for most tube amps.    Decware radials might be better suited.   

Your priorities are the same as mine---above all else, the voice(s) right there in the room, standing ten feet away (if that’s what’s on the recording, of course). In addition to lifelike tonality and freedom from (to quote Gordon Holt) vowel colorations (which rules out horns for me), for me that requires life-size scale and image height (I don't like looking down on the stage, or voices three feet off the floor), and I’ve been satisfied in those regards only by big planars---ESLs (Quads on stands, Sanders, Sound Lab, Martin-Logan, etc.) and Magnetics (Maggie and Eminent Technology). Planars excel in all those regards, as well as transparency (which you know all about, having as do I Stax ESL phones). But planars as you know require considerable space, the availability of which you don’t specifically mention. Some of the big 6’ floor-standing box speakers come close, but point source radiators don’t do it for me. There are a lot of great speakers out there, if you’ve got the cash and floor space! Try to hear the Sanders if you can---they’re really, really good.

We used to live in a small house that was mostly one big room with a high ceiling. Now we live in a bigger house overall for kids visiting, etc., but the rooms are smaller, especially where we sit and read, listen to music, etc. Too small for big flat speakers.

ESLs are the one thing I've never tried, except for my Stax 'phones.  New ESLs all seem to be huge, and small ESLs means vintage, apparently.  I just worry that I'll get some ESL57s that are older than I am, and they'll be too high-maintenance for me at this stage.

Magnaplanars seem more popular now than when I bought mine new over 30 years ago.  My 6 foot Maggies are in storage in my basement (cool, dry, doing OK I hope) with my other bigger speakers and my big old amps. 

If only Magnepan made a small model to be matched with a modest sub, something 36 by 18 inches and at a slight tilt.  But even then, I'm not looking for a big soundstage, just near field speakers that offer something very close to the actual sound of unamplified acoustic instruments and voices.  Not a concert hall sound but more like a small coffee house sound, if even that.  A performer or three with no mics, just as if they were in my house.  that direct, intimate realism.

A guy I work with read this thread and suggested I try to remove the room from the equation.  He suggested a very small listening room made totally dead acoustically to eliminate all reflected sound.  Then aim for very simple, accurate, near field speakers with small quick drivers, narrow baffles, perhaps without full-fledged crossovers, and maybe even sealed cabinets. 

I chuckled and said I should pick up a pair of EPIs or Genesis bookshelves and put 'em on stands.  He reminded me that I do have an unused powered sub that could be made to work with something like that.  (I need to trade off some of my equipment.  Hah!)  He also suggested that perhaps I try hybrid speakers with large ribbon tweeters.

Michael