2. cables
  3. 136356-1955

power cables' effect on power conditioner?

After auditioning different power cables over the years I have settled on the ones I  now have in in my system. I do not have a power conditioner, but am considering one. Will the power cable used from the wall outlet to the conditioner change the sonic characteristics of my system? Or is it recommended to use the same cable from the outlet to the conditioner as the cables from the conditioner to each component?
valinar
Post removed 
lowrider57's avatar
lowrider57
5,417 posts
 
If your Audience PC is 10 gauge, it’s worth trying on the power conditioner. It has a low noise floor, but I wouldn’t call Audience a neutral sounding sounding cable.

Completely agree with @steakster.
Each PC in the chain has an effect on overall sonics.

Regarding power conditioners and amplifiers, make sure you choose a unit that is non-current limiting. IOW, a unit that does not affect the sonics or dynamics of a high current component.

lak's avatar
Ag insider logo xs@2x
lak
4,643 posts
 
During my experimenting with various power conditioners, I agree with folkfreak. "the cable to the conditioner is actually less sensitive than the cables from the conditioner" to the individual components.
Results may vary so experiment and see what happens.
I've experimented with the following; High Fidelity MC-6, High Fidelity Hemisphere, Equi=Tech Model 2Q, DeZorel G2 Mark II, and Core Power Technologies 1800.
Post removed 
Ag insider logo xs@2x
knownothing
1,584 posts
 
Plus one for steakster. Try different cables, but high current capability is important for this application.
More to discover