Typically, hiss is not associated with any power line anomalies, rather hum is usually the culprit. The EAD hissing sounds like an internal one, or an associated component. With the EAD, only, powered up, I would think it to be the culprit. Is this something that just occurred, or has it been a concern for a while? If the EAD is on, with no other piece powered up, and the input is unplugged, I would look strongly at the EAD as the culprit. A slight amount of hiss is normal, with any power amp,especially solid-state and, with efficient speakers, can be audible, especially close to the speaker. Hope this helps. Mike
Power Conditioner Confusion-Help!!
I have a Proceed AVP HT processor; EAD Powermaster 2000 amp, CD,MSB Link DAC, DVD, VCR, Phono, FM, Subs,Vienna Acoustic speakers,JPS Superconductor 2 speaker cables, connected to Monster HTS 2000 power conditioner. I recently cleared up a cable induced power hum by grounding & Mondial M.A.G.I.C. cable filter that I purchased based on the advice I received on this forum (see Troubleshooting Discussions). I am left with a speaker hiss with the EAD only powered up that I'd like to eliminate. Will a power conditioner or line filter do the job. Monster HTS 2000 is not if that is what is needed. I've read the reviews and tech data on Bybee Power Conditioners and Quantum Filters, CinePro 20/30; Tice Power Block III A/B/C; Richard Gray The Power Company, and PS Audio. I'd like to hear your experience and recommendations. Am I wasting my time on these things and need to look elsewhere for a solution? If not, what is the right one to buy. I don't have dealers for these in my area. Thanks for all your good advice.
5 responses Add your response