power conditioning question gentlemen

      I,m considering a power conditioner /surge unit ,Two sunfire subs,nu vista intergrated(draws some juice) ,transport,dac,tt, phono section (dc-ac i may just plug in wall)  .Dedicated 20amp run directly to room x 2 hospital grade rec. I have been looking into richard grays,furman ref,shunyata etc.I have a unique set up here in nor cal.I am completley off grid!,I run a serious solar and res set up with a genny back up.The power is pretty consistant although during changes in genny start up or at time it does fluctuate a little .I never hear it or have never measured a spiked it drops slightly during those milliseconds.I would like to snag a used one in the 1k range .

     inna thanks,  but i,m quite happy with what i have now . I have had alot of seperates to many to list and intergrateds 32yrs in high end .I like where i'm sitting at this point for where my life is at this time.I do not believe that is my issue at all .I believe most of it is in my head ,but i do believe i need a way to keep constant voltage to my gear regardless of the minor power glitches i have,It just makes me nervous.I,m just a guy who like a pretty decent setup ( for here ) and also have a seperate 7:2 Ht room. for the family . I am as you know a musician first so my heart lies with my paul reed smiths,marshall tubes and my vintage les pauls.

        I am also very into metal work and build custom hotrods and motorcycles among having a new born..lol I am spread thin so i will stick with this hand for now.Although i do miss my pv12  among others that i lost in my fire. but not my lp12  i love my classic ;)  
"One mans floor is anothers ceiling"....lol 
Depending on what you need, you can get some features much cheaper. For instance, I think the SMP enabled surge protectors start under $200.


As a surge, noise and over voltage protector, it’s as good as any other unit you can buy. It’s not pretty and doesn’t have a ton of outlets. One step up is the rack mountable with voltage monitor:


SMP is the only surge protection tech. that filters noise in the audible range, down around 3 kHz I believe. Most strips start around 100kHz and go up. It’s not snake oil either, I’ve taken them apart. :) SMP is the only thing I trust my expensive equipment with, replacement warranties be damned. It also protects you from low-level over-voltage conditions that a typical surge strip might never fire on.

None of these include voltage regulation (keeping it between 115 and 125), power factor correcting or remote turn on or multi-bank filtering (separate filters per outlet) though. That’s what you pay the big bucks as you go further up the scale, as it needs more weight to work in the form of transformers or transistors and heat sinks.

I guess my point is, the really cheap units are a lot more effective than people realize and may be all you ever want.


To be complete, series surge supression is a licensed technology which SurgeX also licenses, and there may be others. SurgeX charges about twice what Furman does in the pro/commercial space though, so I haven't mentioned it.

SMP just happens to be Furman's name for the tech they are licensing.


Back in the 1990's there were several forums written on Audiogon regarding solar powered audio systems also battery operated systems that were completely off grid with battery storage for the entire system. I'll be the first one to admit that I'm not educated when it comes to this concept, however perhapes someone could explain to me if you are using solar power and batteries, why would you need  power conditioning; other then when using the back up power generator?

    Thanks guys, especially eric you always seem to have a valid suggestion.I know my system may not be in the 6 digits but it is dam nice and my modded nuvista punches way above its 5k retail back in the day.if anything it certainly has power at 275 a side and 40 peak amps.I love my adagios there reviews speak for themselves.
      I can say i will order a cple smp and run them in my ht room immediatley .I always unplug every audio ac plug when not in use .I have never had a surge on this setup in 6 yrs.If anything like i said its a milliseconds fall off when the genny shuts off .The genny again only charges the batteries it does not provide power to my house.As i said it does have some legs off it to run additional things around my ranch only when runningif i need the big juice. .
    These work only when the genny is running and are not ! in my house,spring house or my 500sq ft tree house 30' in a giant redwood( guest house with a zipline to my pond ) .I can run a large 220v compressor on my batts but when it starts my lights show it for a millisecond. This is a real deal setup over 80 k.

      Lak ,i believe you are correct,i do not need to condition my power imo.I just was thinking what beneifit if any i would achieve if i had a toroidial type set up directly next to my amp to provide instant juice if nessasary and  to delete that slight flutter when it switches.The genny is on an autostart,when the voltage drops to roughly 70% battery it starts auto and takes it to 100% i can have  normal type things running like fridge, 55tv, pond pumps, fans, microwave, etc etc for hrs and hrs .In the summer, like know i could have probly 7 k rollin all day for zzippp! My genny may run for a cple hrs here and there once a night always,rarely before dark,even when im in my studio playing music.
      There isn,t even a pole for power within 7miles of my ranch.I'm 12 miles from a 4light town, 40miles from a wallmart and 120 from a real airport. There are alot of musicians that hide out up here and nobody even knows. :-)  many retired late 60-70s frisco musicians .I will not say who :-)
But alot where at woodstock lol

  Thanks again for the input,has anyone tried one of these Core setups from mark? or the powerblock thing gray had 400 ,1200 etc.I know they may be useless if your not in my situation or so people say ,again i think i may like it..