Preamp Deal of the Century


If anyone is looking for a true "World Class" preamp at a very fair price..heed my advice. I just recieved a Supratek Syrah preamp that was hand built by Mick Maloney in Western Australia, and it is absolutely beautiful! This preamp is the best deal you will ever find. I would put it up against any preamp out there for both looks and sound. Price? $2500 for the Syrah (includes Killer Phono stage). Not into phono? Try the Chardonney line stage for $2100. Don't get me wrong, I am not associated with this company. I am just a very happy owner! This preamp is VERY dynamic, yet liquid. It conveys the sound of music better than any other preamp that I have ever heard! You can check out the Supratek website at www. cantech.net.au
slowhand
Hello Clipsal,

I agree with you completely! I recieved my Cortese at the end of October of 2005. I owned a Syrah before that. Upon receiving the Cortese, I could not believe how fantastic it sounded. Since then it has gone from fantastic to absolute KILLER! I finally put in some NOS tubes, and I found the same thing as you did. The Cortese sounds better with the stock tubes! Mick has done a wonderful job of tuning the preamp to the stock tubes. I now spend my time enjoying music and not worrying about obtaining the latest and greatest tubes. All these guys selling NOS tubes for ridiculous prices can keep them. What more could you possibly ask for. A world class preamp that does not even need NOS tubes to sound world class. I also agree with your comments about your experience with NOS tubes sounding "different" but not better. My advice for anyone contemplating getting a Supratek is DO IT! .Don't worry about buying a bunch of overpriced tubes.
Finally! Damn, I waited so long for someone to post a message like this. The NOS tubes IMO does not "really" improve the sound of the preamp, it changes it and since you spend so much $$ for the tube, it must be good right?

Here's my post dated 7/7/05.

You are into something here. Although the Mullards are great in my Chenin (Metal GZ34), you have to remember that when Mick listened to the preamp, especially the phono, the parameters were adjusted with the conventional tubes in service.

For example, the right resistance to properly biased the JFET's etc. If you open the preamp, you will see that there are rheostat's (blue) on some junctions that their primary fuction was to "tweaked" or "optimized" a certain parameter(s) (i.e. voltage or current)to voiced out the preamp.

...just a thought...

I TOLD YOU SOOOOOOO!!!!!
On the subject of tube rolling, this was in my first post on Audiogon in 2003 ...

" As a final point, I have noticed that there is a lot of discussion about the merits of tube rolling with the 6SN7 output valve in the Cortese and Syrah. Personally, I think that Mick has carefully chosen the stock 6N8P (a 6SN7 equivalent) based on its sonic merits and there is no real need to replace the valve with another. I have in my collection the 6N8P and various 6SN7's including the black Ken Rads; black Brimars with red bases; Toshiba; Raytheons; Mullards and the Sylvania VT231. If I had to chose a favourite it would be the Sylvania VT231 because I find it the most transparent and the highs are sweetest(it can sometimes be a bit be microphonic though). I feel the Cortese and Syrahs are so inherently musical, that it does not make a huge difference swapping valves so long as the valve is nice and fresh, and not noisy to begin with. My advice on this is don't get anal about it, just enjoy the music! "

Having personally heard and seen seen Mick Maloney develop Supratek products since its inception around 1996, I know the guy to be meticulous in tuning each preamp on an oscilloscope to get them to sound the best before they are delivered to the customer. While this doesn't rule out tube swapping (it can be interesting and good fun) it probably does mean the preamps are optimally tuned when they leave the factory, so best to leave well enough alone.

Regards,

Steve M.
Western Australia
My Chardonnay is on the way. Mick emailed me this morning to say its done testing and ready to ship.
Its only been two months since I ordered it, so the wait wasn't too bad. Can't wait, I should have it by the weekend I guess.