2. amps-preamps
  3. 139214-112482

Problem related to Push-Pull or EL34?

Hej

I have compared my EL84 amp with an EL34 amp and what strikes me is that the EL34 amp is boomy. I know that my room has a problem in the bass region and it’s like the E34 amp makes this worse. So why is that? Both are Push-Pull, but my EL84 amp has got the original capacitors replaced to “ultrafast” capacitors. So this makes me wonder if there is any truth in what I've heard: 

  1. ...the Push-Pull design in itself increases the bass and makes the sound a little boomy.

  2. ...you can counteract this by replacing capacitors to “ultrafast” capacitors.

  3. ...EL34 tubes by design emphasis bass frequencies.

This makes me very frustrated because I really like this EL34 amp (LM EL34IA) except for this bass problem. The amp is in my budget range and I need the 40W it gives (which means Push-Pull).

Any thoughts?

simna
simna OP
165 posts
 

@lowrider57 

Yes, I'm gonna change the tubes, but I really wanna know the brand of the stock tubes before I do that. They are just labeled "Line Magnetic". If this dosen't do the trick I will have the capacitors replaced.

Yes, the speakers are easy to drive, and as I wrote, with my old EL84 amp there's no problem with boomines. Or, to be honest, there's a faint hint of boomines. And yes, I know there's a problem somewhere around 46-50Hz.

jond's avatar
jond
5,853 posts
 
I have no idea what I have no idea what constitutes an "ultra-fast capacitor" but it's unlikely caps are the issue as stated by others above. Also you don't actually need to understand damping factor, just the different output taps and use the one that sounds better. lowrider gives you good advice on trying better tubes likely the LM branded tubes are a cost effective option from China, better tubes are out there.


Curious about your Tube Technology Unisis Signature amp, I used to own the Tube Technology Fusion CD64 cd player and absolutely loved it. Sadly it died but based on that listen your "old" amp may in fact be a better amp that the LM amp you're considering.

Last thing did you try moving the speakers around to compensate for that boominess?
simna OP
165 posts
 
@jond
Yes, maybe my old TT is a better. But I have had problems with it or maybe I have had bad luck with the two last quads EL84 tubes. I’ve had trouble with elaking tubes and the bias not being stable and I’m not even sure if I have the right information of how to adjust the bias. A friend of mine said I should adjust the tubes to120mV. I don’t know if it’s to high or not and I can’t find any information anywhere.
TT once sold a meter for the bias adjustment and when that meter showed 3.0 the bias was spot on. But 3.0 what? How do I translate that to mV?
So, the reason for a new amp is that I’m tried of all this hassle.
jond's avatar
jond
5,853 posts
 
@simna I can understand your frustration but have you tried reaching out to Tube Technology?
simna OP
165 posts
 

@

Yes, but the company doesn't excist anymore. I've heard that the guy who owned TT has left England for US (and are now working for Manley I think).

More to discover