2. digital
  3. 147138-79535

Problem with McIntosh C-47 and MCT-450 using Digital DIN cable to playback SACD

I have the McIntosh C-47 Preamp and the McIntosh MCT-450 Transport and I have it connected to the C-47 via Digital DIN cable so I can playback SACD. I purchased the MCT-450 with the hope of growing my SACD collection (I have about 20+ SACDs and thousands of Redbook CDs). I have never had any issues when playing back Redbook CDs. However, when I playback SACD the player intermittently has audio dropout for a second or so throughout the disc. I know it’s not bad disc because if I go back to the same spot where the dropout occurred I will not be able to duplicate the issue.  Again, this happens to all of my SACDs (Example: I have the entire Dead Can Dance SACD MoFi Japanese release and it happens on all of them). It appears if I leave the MCT-450 on for awhile the chances of the audio dropout occurring is reduced. 

I have tried all suggestions from McIntosh Support: Their recommendation was to connect the power cable of both C-47 and MCT-450 to a cheap power strip that doesn’t have any complex circuit so as it won’t cause grounding potential issue on the MCT-450. That sounded fishy to me but  still I tried it with no success. They now want me to take it (MCT-450) to the dealer and see issue occurs there - to eliminate DAC (on C-47) and/or DIN cable issue- which I haven’t gotten around to because I have such a small collection of SACD that these days if I know I’m going to be listening to SACD I just power on the transport and leave it on for few hours prior to my listening session and that normally seems to do the trick - but not always.

Other than the brief audio drop out - as if someone presssd mute- on rare occasions instead of silence I have heard what sounded like digital noise - chirping etc.  Again- all this happens only during SACD playback and never occurs during Redbook playback.

I had searched for anyone reporting similar issse but didn’t come across it so would appreciate feedback from those with the MCT-450 using the Digital DIN cable.

Thanks.




insightfulman
davidal
2 posts
 
Hi, I have the exact same problem.   I have a McIntosh C52 with an Mct 450.  I got the same response from McIntosh.   Have you rectified the problem with your system?  
Thanks, I hope you can help me out. 
techno__dude
511 posts
 
Who still need or buy transports like the MCT 450 nowadays ? 😳
davidal
2 posts
 
I have one and I  still have a problem.  This is what the forum  is all about.   Can someone help?
insightfulman OP
6 posts
 
I have not been able to resolve this issue. I have tried leaving on the MCT450 for days on end to see if it helps with the random dropout of sound when playing SACD through DIN. 
Macintosh recommend I take the unit back to my dealer to see they can reproduce the issue but never found time to do so. Now that I’m stuck at home been playing more music and sure enough playing SACD still has that issue.

I am certain the issue is with how the MCT450 is sending data to C-47 via DIN.

Please let me know if you guys had better luck than me.
insightfulman OP
6 posts
 
Since I’ve been stuck at home due to the shelter in place order I’ve been trying out few things to see if I can make this problem go away and no matter what I’ve tried the issue remains. The only I can playback a SACD disc without this issue is if I change the disc layer setting on the MCT450 to CD instead of SACD (which defeats the purpose of buying a SACD) but doing so causes no issues and the CD layer on the same SACD disc plays back fine. Thus, I have to assume this is an issue what the MC-47 DAC on how it handles the SACD data stream from the digital DIN cable coming in from the MCT450.
More to discover