Believe it or not I use the Kimber Cable speaker wire.
I forget the model number but it is black (negative) and brown (positive) wire that is braided.
I believe that there are four wires of each color (they are NOT teflon).
I think that it is the least expensive of all of the Kimber braided speaker cable.
I have 25+ foot runs from my amps to the stacked ESL57's so I needed something that was good but did not break the bank.
I run my stacks in parallel (and connect to the 8 Ohm tap on my A-340A's) so I use a piece of the Kimber to jumper between them as well.
BTW. I tried less expensive speaker wires but the Kimber gave me the best results so REAL speaker wire does make a difference. OTOH, interconnects seemed to make a bigger improvement in my system than the speaker wire - but every little thing helps when you have "The demanding Mistress - ESL57's"! :)
I forget the model number but it is black (negative) and brown (positive) wire that is braided.
I believe that there are four wires of each color (they are NOT teflon).
I think that it is the least expensive of all of the Kimber braided speaker cable.
I have 25+ foot runs from my amps to the stacked ESL57's so I needed something that was good but did not break the bank.
I run my stacks in parallel (and connect to the 8 Ohm tap on my A-340A's) so I use a piece of the Kimber to jumper between them as well.
BTW. I tried less expensive speaker wires but the Kimber gave me the best results so REAL speaker wire does make a difference. OTOH, interconnects seemed to make a bigger improvement in my system than the speaker wire - but every little thing helps when you have "The demanding Mistress - ESL57's"! :)