2. digital
  3. 127803-18279

Quick How to Stream MQA via Tidal to Bluesound

Just recently (yesterday?), Tidal started offering "masters" recordings that are in MQA format @ 96khz as opposed to 44.1khz. But, the catch--at least right now--is that such offerings are limited to (a) <200 albums; and (b) streaming only through Tidal's desktop app--not through iPhone, iPad, etc. 

Here's how I got the MQA to work in Bluesound.  It's only a temporary fix. 

1. Go to Tidal on my computer/desktop app. 
2. Open Tidal. 
3. Go to "What's New"
4. Next to Albums just above the album artwork you'll see, "New, Recommended, Top 20, Masters."  Select Masters. 
5. When you see an album of Masters you like, add it to your Favorites. 
6. Open your Bluesound app on your favorite device (does not have to be your computer/desktop). 
7. Go to Favorites, Albums, and find the album.  It can be a bit difficult if you already have, for example, a previous non-masters version in your favorites.  But, when you stream the proper album your DAC--if so equipped--will indicate that it's streaming in 96khz as opposed to the standard 44.1khz. 

Tidal needs to make this browsing functionality available in its own app. That may not help identify the "Masters" in Bluesound's app, but til those two things are updated you can use this workaround. 

I tested Van Morrison's Moondance and several Led Zeppelin albums.  The 96khz is subtlely different streaming through Tidal - Bluesound - my NAD M51 DAC.  I like the sound of vocals, drums, bass and transients. 
128x128jbhiller
cycles2
205 posts
 
The above method 'jbhiler' describes even works on non-MQA DACs. I'm listening to TIDAL Masters (MQA) tracks with my Lumin S1.  The tracks show as 48K / 24 bit, which is of course is higher than the Redbook standard TIDAL HiFi usually delivers. I'm guessing if my DAC was MQA capable, it would show as 96K / 24 bit.

Does this prove you don't need the TIDAL desktop app to decode the Masters (MQA) tracks?
kalali's avatar
kalali
1,977 posts
 
A couple of things. Not all of the Tidal MQA contents are delivered at 24/96 so your non-MQA DAC is just showing the original rate. Try a few other titles from the Masters list and you'll see 96 on most of them but that's the most you'll get from a non-MQA DAC. The benefit of an MQA enabled DAC comes in when the original content is being delivered at 24/192. Here's what I've learned: the Tidal app decodes the first MQA phase up to 96 via software and going 96 -> 192 requires the hardware in the DAC. I also verified with the Bluesound helpdesk that both analog and digital coax outputs can handle MQA content. 
andynotadam's avatar
andynotadam
169 posts
 
I'm using a Bluesound Node 2 into a Bel Canto DAC 3.7 via SPDIF and I'm getting either 88.2 or 96 kHz on most Tidal MQA material. 
kalali's avatar
kalali
1,977 posts
 
You may want to try bypassing the Bel Canto and see/hear if those same contents sound better. The non-MQA DAC will limit the sampling to 96 if those contents were originally streamed at 192. The trade-off is going to be between the quality of the two DACs and the second MQA "unfolding" performed by the Node2.
halecory's avatar
halecory
11 posts
 
@jank 
Do you run a desktop to the BDP-105d via usb? Or can it stream Tidal MQA independently?  I currently don't have the Oppo (nor Tidal) and I'm researching best ways of integrating MQA into my system.

More to discover