2. analog
  3. 1393529918

Raven turntable owners:oiling & what type?

It seems the instructions for oiling the axle/bearing/bearing well indicate a very small amount of oil. I've found extra oil is needed to allow the platter to be more smoothly laid into place and lifted off for cleaning and re-oiling. Too little, and things dry out. What has been your experience with this, and do any of you use a brand or type of oil different from that supplied by TW Acustic? If so, how does it compare regarding effectiveness?
opus88
elinor's avatar
elinor
275 posts
 
Ianlane, I don't own your TT. I have a Raven which is close to Anniversary status. My bearing is still a pretty snug fit after 5 years of heavy rotation. Obviously there is something more going on with your table. I think Jeff and Thomas can be trusted. Neither one of them as you say makes unjust claims regarding performance of their products.
pcosta
241 posts
 
I will soon be taking delivery of a new Black Night platter option for my original Raven AC. I have an early version of the AC. The upgrade I assume will be two fold. One, a new bearing developed for the Black Night, and second the extra mass of the copper platter. I will provide everyone here with a brief description of the improvements.
I heard the new platter option at the past RMAF. The whole system was impressive to say the least.
elinor's avatar
elinor
275 posts
 
Pcosta do you have the 3 motor pod or are you using the single motor?
pcosta
241 posts
 
Elinor
I have the single motor only. At least for now. I will eventually get the triple motor unit.
elinor's avatar
elinor
275 posts
 
Pcosta, and I purchased the 3 motor pod which was a huge step forward. A friend who also owns a Raven came over to play a couple of records and we switched out the single motor with the triple and he purchased the triple in an email he sent to Jeff from my living room. That's how startling the difference is. That is why I'm curious about the all copper platter.
More to discover