Rega Belts need replacing every 3 years and even though you do not see slippage the tension in a worn belt is not spot-on and definitely manifests itself as a slow start-up as one of the first signs.If your motor is slow that is bad.Try dusting your original belt in talcum powder for more grip and see if that helps.Put some powder and the belt in a plastic bag and shake,then replace the belt.If it was meant to require a nudge on start-up when new I can't remember,but keep tweaking and you'll get there.A new table should work properly.
Rega Planar 25 problem
My Rega Planar 25 has an obvious problem: the small round black plastic piece that fits over the motor spindle (i.e. the little shiny steel rod. about 1/8" diameter, that turns with the motor)is not fastened to the motor spindle: it can be lifted off with no effort, so it isn't a friction fit, and it shows no sign of glue or cement or the like.
Does anyone know how these two pieces are supposed to be held together? I have a Rega Planar 3 too, and what look like identical parts (except with no shiny steelin sight) are firmly held together. It's a mystery why my 25 ever worked, but however that may be, it sure doesn't now!
Can anyone help? I posted a similar message some months ago and was told to contact the USA Rega distributor, which I tried to do. No answer came back.
Thanks,
Tom Patton
Does anyone know how these two pieces are supposed to be held together? I have a Rega Planar 3 too, and what look like identical parts (except with no shiny steelin sight) are firmly held together. It's a mystery why my 25 ever worked, but however that may be, it sure doesn't now!
Can anyone help? I posted a similar message some months ago and was told to contact the USA Rega distributor, which I tried to do. No answer came back.
Thanks,
Tom Patton
- ...
- 16 posts total
- 16 posts total