Speaker Wire Recommendations?


I'm not looking to purchase immediately, but certainly interested in starting to look at possible speaker cable/wire options.

Focal 836v speakers and Integra 50.1 receiver are the components.

I'm interested to know what cables, probably sub $200, people would recommend or if I will really be able to hear a difference that would be worth the investment. My current wires are the original Monster stuff that I had with my previous speakers.
mceljo
Found Clear Day Cable here on A'gon - to my ears very good and very reasonably priced
Buconero117 - That's what I'm afraid of and trying to get a feel for. Some people believe that speaker wire is more about "snake oils" than actual factual improvement, but I'm not yet convinced one way or the other.

I think that it's possible for things like speaker wires to make a difference IF the system is of high enough quality, but not sure where that level begins. I doublt a $5k speaker wire would make a difference in a $300 shelf system, so at what point does it start to make a big enough difference to justify the additonal cost.
I think that it's possible for things like speaker wires to make a difference IF the system is of high enough quality, but not sure where that level begins. I doubt a $5k speaker wire would make a difference in a $300 shelf system, so at what point does it start to make a big enough difference to justify the additonal cost.
It's important to keep in mind that the presence or absence of cable differences (and the nature of those differences if present) is not only dependent on system resolution and quality, but is highly dependent on the particular characteristics of what is being connected.

In the case of speaker cables that would include, among other things, the impedance characteristics of the speaker, the sensitivity of the speaker, and the importance of amplifier damping factor and tight woofer control to the particular speaker.

Although your speakers are rated as having an 8 ohm nominal impedance, with a dip to 3 ohms in the bass region, in this review they were measured as 5 ohms nominal with a dip to 3.5 ohms in the bass region, and with 92db sensitivity. I would give greatest weight to suggestions that are based on experience with speakers having similar impedance and sensitivity characteristics, and speakers that employ similar driver configurations (which means that experience with planar speakers is probably not particularly relevant).

Also, keep in mind that the longer the cable, the more pronounced its effects will be. And that "different" does not necessarily mean "better," and that "more expensive" does not necessarily mean "better" either.

Regards,
-- Al